[Asterisk-Users] MWI indicator on SNOM200 doesn't disappear

[Rich Adamson]

FWIW, the snom 200 also had a problem when two or more lines were
registering with *. Since the MWI is shared between all lines, a message
left on line 1 would turn it on, followed by a notify on line 2 that
no messages existed and turned if off. On/off/on/off and most of the 
time you wouldn't even notice the change. Not a very cool multi-line
phone.

------------------------
> On recent releases of the snom200 firmware, the MWI indicator will turn 
> on, but won't turn off when the message has been checked. It works on 
> firmware 2.03o, but not in 2.04g or newer. I filed a bug report with 
> snom, but they're claiming it is an asterisk issue and that it should 
> have been resolved. They suggested that I ask on the list.
> 
> "Anyway, Asterisk had a bug where it didn't send the NOTIFY correctly to
> turn off the MWI.  The message doesn't contain the line so the phone
> doesn't know which line to apply the messages to.
> 
> Basically the NOTIFY message should contain something like the
> following:
> NOTIFY sip:dephone at 209.232.233.232;line=34n34jed SIP/2.0
> 
> There was a bugfix for this in Asterisk for this problem, do you have
> that applied?"
> 
> I am running the current CVS version, and don't see anything in the 
> code that looks like this has been touched, and I haven't seen 
> reference to it on this list. They are right in that the line 
> information isn't being sent, looking at the SIP debugs on both ends. 
> Anybody have ideas?
> 
> Ian
> 
> -- 
> Ian White
> South Island Community Access Network (SICAN)
> email: iwhite at victoria.tc.ca
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

---------------End of Original Message-----------------