fwd:Re: [Asterisk-Users] Asterisk prepaid debug

Julio juliom at telelinkusa.net
Tue Apr 20 10:23:46 MST 2004


I use http://www.voip-info.org/wiki-Asterisk+callingcard
You only should compile the prepaid.c (look at readme file).

Regards.


Julio



----- Original Message -----
From: <clive18 at webmail.co.za>
To: <juliom at telelinkusa.net>
Sent: Tuesday, April 20, 2004 12:47 AM
Subject: fwd:Re: [Asterisk-Users] Asterisk prepaid debug


> Hi
>
> Which pre-paid app are you using?.
> Is it the one on the wiki?
>
> Any pointers will be apprciated?.
>
> Thanks and Regards
> Clive
>
>
> On Mon, 19 Apr 2004 20:07:14 -0600
>  "Julio" <juliom at telelinkusa.net> wrote:
> > My Asterisk prepaid debug is:
> >
> >
> > - Hungup 'Zap/2-1'
> > Urgent handler
> >     -- Starting simple switch on 'Zap/2-1'
> > Urgent handler
> >     -- Playing 'prepaid-enter-card-num' (language 'en')
> > Urgent handler
> >     -- Playing 'prepaid-you-have' (language 'en')
> > Urgent handler
> >     -- Playing 'digits/4' (language 'en')
> > Urgent handler
> >     -- Playing 'digits/hundred' (language 'en')
> > Urgent handler
> >     -- Playing 'prepaid-dollars' (language 'en')
> > Urgent handler
> >     -- Playing 'prepaid-enter-dest' (language 'en')
> > Urgent handler
> >     -- Playing 'prepaid-dest-blocked' (language 'en')
> > Urgent handler
> >     -- Playing 'prepaid-dest-unreachable' (language 'en')
> >
> >
> > Why  'prepaid-dest-unreachable' ??????
> >
> > Thks.
> >
> > Regards
> >
> >
> >
> >
> >
> >
> >   ----- Original Message -----
> >   From: Martin Christian Koch
> >   To: asterisk-users at lists.digium.com
> >   Sent: Monday, April 19, 2004 4:05 PM
> >   Subject: [Asterisk-Users] spandsp/rxfax terminates
> > asterisk
> >
> >
> >   Initial handshake sounds fine, but asterisks dies
> > before receive of the fax. Here is the log :
> >
> >
> >
> >   Changed from phase 0 to 1
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Start receiving document
> >
> >   Changed from phase 1 to 4
> >
> >   Sending ident
> >
> >   >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> > 20 20 20 20 20 20
> >
> >   DIS:
> >
> >   Preferred octets: 256
> >
> >   Can receive fax
> >
> >   Supported data signalling rates: V.27ter and V.29
> >
> >   R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >
> >   2D coding OK
> >
> >   Scan line length: 215mm
> >
> >   Recording length: A4 (297mm)
> >
> >   Receiver's minimum scan line time: 0ms at 3.85 l/mm:
> > T7.7 = T3.85
> >
> >   R8x15.4lines/mm OK
> >
> >   Minimum scan line time for higher resolutions: T15.4 =
> > T7.7
> >
> >   >>> DIS: 80 00 ce f0 80 80 01
> >
> >   HDLC underflow in state 9
> >
> >   Changed from phase 4 to 3
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   Slow carrier up
> >
> >   Slow carrier down
> >
> >   T4 timeout in state 9
> >
> >   Changed from phase 3 to 4
> >
> >   Sending ident
> >
> >   >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> > 20 20 20 20 20 20
> >
> >   DIS:
> >
> >   Preferred octets: 256
> >
> >   Can receive fax
> >
> >   Supported data signalling rates: V.27ter and V.29
> >
> >   R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >
> >   2D coding OK
> >
> >   Scan line length: 215mm
> >
> >   Recording length: A4 (297mm)
> >
> >   Receiver's minimum scan line time: 0ms at 3.85 l/mm:
> > T7.7 = T3.85
> >
> >   R8x15.4lines/mm OK
> >
> >   Minimum scan line time for higher resolutions: T15.4 =
> > T7.7
> >
> >   >>> DIS: 80 00 ce f0 80 80 01
> >
> >   T2 timeout
> >
> >   Start receiving document
> >
> >   Sending ident
> >
> >   >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20
> > 20 20 20 20 20 20
> >
> >   DIS:
> >
> >   Preferred octets: 256
> >
> >   Can receive fax
> >
> >   Supported data signalling rates: V.27ter and V.29
> >
> >   R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >
> >   2D coding OK
> >
> >   Scan line length: 215mm
> >
> >   Recording length: A4 (297mm)
> >
> >   Receiver's minimum scan line time: 0ms at 3.85 l/mm:
> > T7.7 = T3.85
> >
> >   R8x15.4lines/mm OK
> >
> >   Minimum scan line time for higher resolutions: T15.4 =
> > T7.7
> >
> >   >>> DIS: 80 00 ce f0 80 80 01
> >
> >   HDLC underflow in state 9
> >
> >   Changed from phase 4 to 3
> >
> >   Slow carrier up
> >
> >   <<< TSI: 43 30 36 37 37 36 31 36 35 20 35 34 2b 20 20
> > 20 20 20 20 20 20
> >
> >   TSI without final frame tag
> >
> >   Remote fax gave TSI as: "+45 56167760"
> >
> >   <<< DCS: 83 00 46 20
> >
> >   DCS with final frame tag
> >
> >   In state 9
> >
> >   DCS:
> >
> >   Can receive fax
> >
> >   Selected data signalling rate: V.29, 9600bps
> >
> >   R8x7.7lines/mm and/or 200x200pels/25.4mm OK
> >
> >   Scan line length: 215mm
> >
> >   Recording length: A4 (297mm)
> >
> >   Minimum scan line time: 10ms
> >
> >   Get at 9600
> >
> >   Changed from phase 3 to 5
> >
> >   Fast carrier up
> >
> >   Fast carrier down
> >
> >   Fast carrier up
> >
> >   Coarse carrier frequency 1700.00 (64)
> >
> >   Training error 29.095569
> >
> >   Training succeeded (constellation mismatch 25.504344)
> >
> >   Fast carrier trained
> >
> >   Fast carrier down
> >
> >   Changed from phase 5 to 4
> >
> >   Start rx document - compression 1
> >
> >   Start rx page
> >
> >   asterisk in realloc(): warning: junk pointer, too high
> > to make sense
> >
> >   Oh dear!
> >
> >   >>> CFR: 84
> >
> >   HDLC underflow in state 5
> >
> >   Post trainability
> >
> >   Changed from phase 4 to 5
> >
> >   Fast carrier up
> >
> >   Coarse carrier frequency 1700.04 (64)
> >
> >   Training error 26.487284
> >
> >   Training succeeded (constellation mismatch 27.123313)
> >
> >   Fast carrier trained
> >
> >   Segmentation fault (core dumped)
> >
> >
> >
> >   Anyone ?
> >
> >
> >
> >   Thanks,
> >
> >   Martin
> >
> >
> >
> >
> --------------------------------------------------------------------------
----
> >   Min mail er beskyttet af SPAMfighter
> >   3174 spam mails er blokeret indtil videre.
> >   Hent gratis SPAMfighter i dag!
>
> ______________________________________________________________
> Herbalife Independent Distributor http://www.healthiest.co.za




More information about the asterisk-users mailing list