[Asterisk-Users] Asterisk prepaid debug

[Julio]

My Asterisk prepaid debug is:


- Hungup 'Zap/2-1'
Urgent handler
    -- Starting simple switch on 'Zap/2-1'
Urgent handler
    -- Playing 'prepaid-enter-card-num' (language 'en')
Urgent handler
    -- Playing 'prepaid-you-have' (language 'en')
Urgent handler
    -- Playing 'digits/4' (language 'en')
Urgent handler
    -- Playing 'digits/hundred' (language 'en')
Urgent handler
    -- Playing 'prepaid-dollars' (language 'en')
Urgent handler
    -- Playing 'prepaid-enter-dest' (language 'en')
Urgent handler
    -- Playing 'prepaid-dest-blocked' (language 'en')
Urgent handler
    -- Playing 'prepaid-dest-unreachable' (language 'en')


Why  'prepaid-dest-unreachable' ?????? 

Thks.

Regards






  ----- Original Message ----- 
  From: Martin Christian Koch 
  To: asterisk-users at lists.digium.com 
  Sent: Monday, April 19, 2004 4:05 PM
  Subject: [Asterisk-Users] spandsp/rxfax terminates asterisk


  Initial handshake sounds fine, but asterisks dies before receive of the fax. Here is the log :



  Changed from phase 0 to 1

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Start receiving document

  Changed from phase 1 to 4

  Sending ident

  >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

  DIS:

  Preferred octets: 256

  Can receive fax

  Supported data signalling rates: V.27ter and V.29

  R8x7.7lines/mm and/or 200x200pels/25.4mm OK

  2D coding OK

  Scan line length: 215mm

  Recording length: A4 (297mm)

  Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85

  R8x15.4lines/mm OK

  Minimum scan line time for higher resolutions: T15.4 = T7.7

  >>> DIS: 80 00 ce f0 80 80 01

  HDLC underflow in state 9

  Changed from phase 4 to 3

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  Slow carrier up

  Slow carrier down

  T4 timeout in state 9

  Changed from phase 3 to 4

  Sending ident

  >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

  DIS:

  Preferred octets: 256

  Can receive fax

  Supported data signalling rates: V.27ter and V.29

  R8x7.7lines/mm and/or 200x200pels/25.4mm OK

  2D coding OK

  Scan line length: 215mm

  Recording length: A4 (297mm)

  Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85

  R8x15.4lines/mm OK

  Minimum scan line time for higher resolutions: T15.4 = T7.7

  >>> DIS: 80 00 ce f0 80 80 01

  T2 timeout

  Start receiving document

  Sending ident

  >>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20

  DIS:

  Preferred octets: 256

  Can receive fax

  Supported data signalling rates: V.27ter and V.29

  R8x7.7lines/mm and/or 200x200pels/25.4mm OK

  2D coding OK

  Scan line length: 215mm

  Recording length: A4 (297mm)

  Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85

  R8x15.4lines/mm OK

  Minimum scan line time for higher resolutions: T15.4 = T7.7

  >>> DIS: 80 00 ce f0 80 80 01

  HDLC underflow in state 9

  Changed from phase 4 to 3

  Slow carrier up

  <<< TSI: 43 30 36 37 37 36 31 36 35 20 35 34 2b 20 20 20 20 20 20 20 20

  TSI without final frame tag

  Remote fax gave TSI as: "+45 56167760"

  <<< DCS: 83 00 46 20

  DCS with final frame tag

  In state 9

  DCS:

  Can receive fax

  Selected data signalling rate: V.29, 9600bps

  R8x7.7lines/mm and/or 200x200pels/25.4mm OK

  Scan line length: 215mm

  Recording length: A4 (297mm)

  Minimum scan line time: 10ms

  Get at 9600

  Changed from phase 3 to 5

  Fast carrier up

  Fast carrier down

  Fast carrier up

  Coarse carrier frequency 1700.00 (64)

  Training error 29.095569

  Training succeeded (constellation mismatch 25.504344)

  Fast carrier trained

  Fast carrier down

  Changed from phase 5 to 4

  Start rx document - compression 1

  Start rx page

  asterisk in realloc(): warning: junk pointer, too high to make sense

  Oh dear!

  >>> CFR: 84

  HDLC underflow in state 5

  Post trainability

  Changed from phase 4 to 5

  Fast carrier up

  Coarse carrier frequency 1700.04 (64)

  Training error 26.487284

  Training succeeded (constellation mismatch 27.123313)

  Fast carrier trained

  Segmentation fault (core dumped)



  Anyone ?



  Thanks,

  Martin



------------------------------------------------------------------------------
  Min mail er beskyttet af SPAMfighter 
  3174 spam mails er blokeret indtil videre.
  Hent gratis SPAMfighter i dag! 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040419/0f1f59f7/attachment.htm