[Asterisk-Users] SIP device rings once on busy before giving busy tone with dialplan

[Mark Elkins]

On Sat, 2004-04-17 at 15:58, Chris Orme wrote:

> My dialplan is for the outgoing SIP call is:
> 
> exten => _00.,1,AbsoluteTimeout(3600)
> exten => _00.,2,Dial(${TRUNK1}/${EXTEN:2},45,r)
> exten => _00.,3,Answer
> exten => _00.,4,Hangup
> exten => _00.,103,Dial(${TRUNK2}/${EXTEN:2},45,r)
> exten => _00.,104,Answer
> exten => _00.,105,Hangup
> 
> (if call can go through on TRUNK1 send it out, if TRUNK1 is out of
> capacity and therefore busy then try trunk 2 before giving up) if that is
> busy (therefore it is likely the number really is busy then grab the
> caller and hang them up (and they then hear 'busy').  


Um - I'm probably missing the point entirely - but why are your trunks
not in a group and why are you not then using the group to dial out on?

(not posted to Asterisk - just you)
-- 
  .  .     ___. .__      Posix Systems - Sth Africa
 /| /|       / /__       mje at posix.co.za  -  Mark J Elkins, Cisco CCIE
/ |/ |ARK \_/ /__ LKINS  Tel: +27 12 807 0590  Cell: +27 82 601 0496

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040418/d4ecb7e8/attachment.pgp