[Asterisk-Users] RxFax/spandsp Crash

reseaux reseauxit at yahoo.it
Thu Apr 1 04:06:35 MST 2004


Dear Steve
	i have try SpanDSP from the first version to the last one (1k) with my Canon 
FAX and with my modem  but every time i see a lot of message like this:
-----
I send a Fax from my Canon B150 i have the following error:
    -- Starting simple switch on 'Zap/33-1'
    -- Executing RxFAX("Zap/33-1", "/home/user/testfax.tif") in new stack
Changed from phase 0 to 1
Slow carrier up
Slow carrier down
Start receiving document
Changed from phase 1 to 4
Sending ident
>>> CSI: 40 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
DIS:
Preferred octets: 256
Can receive fax
Supported data signalling rates: V.27ter and V.29
R8x7.7lines/mm and/or 200x200pels/25.4mm OK
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85
R8x15.4lines/mm OK
Minimum scan line time for higher resolutions: T15.4 = T7.7
>>> DIS: 80 00 ce f0 80 80 01
HDLC underflow in state 9
Changed from phase 4 to 3
Slow carrier up
<<< TSI: 43 37 30 38 30 35 33 31 33 33 30 20 20 20 20 20 20 20 20 20 20
TSI without final frame tag
Remote fax gave TSI as: "031xxxxx"
<<< DCS: 83 00 86 a0 00
DCS with final frame tag
In state 9
DCS:
Can receive fax
Selected data signalling rate: V.29, 9600bps
2D coding OK
Scan line length: 215mm
Recording length: A4 (297mm)
Minimum scan line time: 10ms
Get at 9600
Changed from phase 3 to 5
Fast carrier up
Floating point exception
[root at pbx asterisk]# Ouch ... error while writing audio data: : Broken pipe
Ouch ... error while writing audio data: : Broken pipe
-----
And Crashed...
The Fax is connect to FXS line of my TDM400
Canon--->TDM400 

I used Mandrake 9.2 with latest libtiff:
libtiff3-3.5.7-11mdk
libtiff-progs-3.5.7-11mdk
libtiff3-devel-3.5.7-11mdk
and with Asterist cvs Stable 1_0 30-03-04 also with Stable 0.7.2. 

I follow every line of your readme file, but nothing to do.
Can you give some tips? I cant understand if i have lost something or if is 
possible problem with my fax machine?
Thanks in advance 
Dimitri




More information about the asterisk-users mailing list