[Asterisk-Users] TDM400P > BT

[Michael Bielicki]

The TDM400p is a fxs device, meaning you cannot connect it to a line socket, 
you can only connect it to a handset. to connect your * box to BT you will 
need x100p cards.
for the handset a straighthrough rj11 should work.

On Tuesday 30 September 2003 11:51 am, Matthew J Keay wrote:
> Hi,
>
> I've found this thread in the archives and am currently planning to
> connect my digium kit to a BT landline and also connect a normal UK
> phone respectively. I've seen a couple of people asking about it but not
> the answers.
>
> My question is - do I need a modtap (listed at maplin.co.uk as BT to
> RJ45 adapters) full master with line protection, pabx master without
> line protection or a pabx slave socket. --or-- can I just use a
> straight-thru rj11 cable for the handset and a straight-thru rj11<>bt
> modem cable for the line?
>
> Matthew

-- 
Michael Bielicki
Managing Director
TAAN Consultants Ltd
http://www.global-gateway.net/

--------------------------------------------------------------------------

This correspondence is for the named person's use only. It may contain
confidential or legally privileged information or both. No confidentiality
or privilege is waived or lost by any mistransmission. If you receive this
correspondence in error, please immediately delete it from your system and
notify the sender. You must not disclose, copy or rely on any part of this
correspondence if you are not the intended recipient.

Any opinions expressed in this message are those of the individual sender.