[Asterisk-Users] Configs for IAX <> IAX trunk

[Lee Goodman]

Thanks
So lets say BOX A switch => BOXB
BOXA has extensions 100-199
BOXB has extension 200-299

Phone 100 on BOX A calls extension 210.
How does BOXA know that 210 lives on BOXB and to route the call over the IAX
trunk to BOXB

Lee
----- Original Message -----
From: "Brian West" <brian at bkw.org>
To: <asterisk-users at lists.digium.com>
Sent: Friday, September 26, 2003 10:56 PM
Subject: Re: [Asterisk-Users] Configs for IAX <> IAX trunk


> Just a heads up.. you can't loop switch statements
>
> ie
>
> BOX A switch => BOX B
> BOX B switch => BOX A
>
> show dialplan will show the switch but not the dialplan of the remote
> switch.
>
> bkw
>
> On Fri, 26 Sep 2003, Lee Goodman wrote:
>
> > Hello
> >
> > I want to setup a IAX trunk between 2 asterisk servers. I also want to
use
> > the switch command (I believe that will let the 2 asterisk servers share
a
> > dialplan). Can someone share a set of config files (or just the
appropriate
> > commands)?
> >
> > Does each Asterisk have to register to the other Asterisk to make this
work?
> > How does the authentication work (and is configured) between the 2
Asterisk
> > servers?
> >
> > How can I tell if the dialplans are being shared? (would the "show
dialplan
> > " CLI command show the other asterisk server dialplan as well?
> >
> > Thanks
> >
> > Lee Goodman
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users