[Asterisk-Users] Cisco 2600 and ASTERISK and calling out

[Bartosz Jozwiak]

This is my dial peer for outband calls:
dial-peer voice 400 pots
destination-pattern 9T
voice-port 1/1/0

When I dialing directly to the router it works.
But when I am using Asterisk dialing out it does not want to work.
Just look down for my configuration and debug i get.

-- Bart


--------------------
You have no dial-peer telling the router what to do with the outbound call.

http://www.tape.net/~gerry/asterisk/cisco26x0.html

At 12:50 PM 9/26/2003, you wrote:
>Like Gerry wrote for callerid you need VIC-2FXO-M1 card.
>
>Right now I am stuck on making outgoing call.
>
>Could soembody help me with the configuration.
>
>On cisco I have soemthing like that:
>
>dial-peer voice 400 pots
>destination-pattern 9T
>voice-port 1/1/0
>
>In extensions.conf
>
>exten=>9.,1,Dial(H323/${EXTEN:1}@blah)
>exten=>9.,2,Congestion
>
>In h323.conf
>
>[blah]
>type=friend
>host=xxx.xxx.xxx.xxx
>contex=>default
>exten=>9999,1,Goto(s,1)
>incominglimit=4
>
>When dialing
>99xxxxxx
>
>I am getting 503 Service Unavailable
>And there is nothing on debug on Router. Looks like call get stuck somewhere
>in asterisk
>And Asterisk says this:
>     -- Called 08500569 at blah
>   == No one is available to answer at this time
>     -- Executing Congestion("SIP/1008-1dc7", "") in new stack
>   == Spawn extension (default, 9908500569, 2) exited non-zero on
>'SIP/1008-1dc7'
>
>
>What could be the problem ???
>
>----- Original Message -----
>From: "Gerry Boudreaux" <gerry at intersurf.com>
>To: <asterisk-users at lists.digium.com>
>Sent: Friday, September 26, 2003 2:26 PM
>Subject: Re: [Asterisk-Users] Cisco 2600 and ASTERISK
>
>
> > To get callerid you apparently need the VIC-2FXO-M1 card from Cisco.
> >
> > Gerry
> >
> > At 12:07 PM 9/26/2003, Michael Gschwandtner wrote:
> > >On Fri, 26 Sep 2003 12:51:16 -0300, Bartosz Jozwiak wrote
> > > > I made it work!
> > > > My miste was:
> > > >
> > > > session target ipv4:66.178.36.220:1720
> > > > when I change it to session target ipv4:66.178.36.220
> > > > everything works just fine.
> > >
> > >Do you get the called number? So you can decide what to do woth the
> > >call.  I'm really
> > >interestet in this because i'm stuck at this point. I'll get the calls
>but
> > >i don't get the called
> > >number.
> > >
> > >
> > > > Right now I have to make outgoing call.
> > > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users






-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/