[Asterisk-Users] Cisco 2600 and ASTERISK

[Bartosz Jozwiak]

This is my configuration of my cisco router and still it does not want to
work :(


Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname asterisk
!
aaa new-model
aaa authentication login default local
enable secret 5 $1$bJzJ$bjJ.hc0TbiopbjjMUnyhg/
!
username admin password 7 07002C494908
!
!
!
!
ip subnet-zero
ip name-server 66.178.37.211
!
!
!
!
voice-port 1/0/0
!
voice-port 1/0/1
!
voice-port 1/1/0
!
voice-port 1/1/1
 connection plar 9999
!
!
dial-peer voice 1000 voip
 max-conn 4
 destination-pattern 9999
 req-qos guaranteed-delay
 codec g711ulaw
 ip precedence 5
 no vad
 session target ipv4:66.178.37.169
!
!
interface Ethernet0/0
 ip address 66.178.37.169 255.255.254.0
 no ip directed-broadcast
 half-duplex
!
interface Serial0/0
 no ip address
 no ip directed-broadcast
 shutdown
!
interface Ethernet0/1
 no ip address
 no ip directed-broadcast
 shutdown
 half-duplex
!
ip classless
ip route 0.0.0.0 0.0.0.0 66.178.36.4
no ip http server
!
!
line con 0
 transport input none
line aux 0
line vty 0 4
!
no scheduler allocate
end


----- Original Message ----- 
From: "Brian West" <brian at bkw.org>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, September 24, 2003 2:25 PM
Subject: RE: [Asterisk-Users] Cisco 2600 and ASTERISK


>
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080093f62.shtml
>
> That covers the thridparty h323 stuff with *
>
> bkw
>
> On Wed, 24 Sep 2003, Sean Figgins wrote:
>
> >
> > That is about what I have been seing for help.  Has anyone any clue what
> > to di with a 2600 that has a T1 adapter on a high-density high-density
> > voice port adapter?
> >
> > BTW...  Because I am lazy, what does plar do?
> >
> > -Sean
> >
> > On Wed, 24 Sep 2003, Brian West wrote:
> >
> > > This is simple to do..
> > >
> > > voice-port 1/0/0
> > >  connection plar 9999
> > > !
> > > voice-port 1/0/1
> > >  connection plar 9999
> > > !
> > > dial-peer voice 1000 voip
> > >  max-conn 4
> > >  destination-pattern 9999
> > >  req-qos guaranteed-delay
> > >  codec g711ulaw
> > >  ip precedence 5
> > >  no vad
> > >  session target ipv4:x.x.x.x
> > > !
> > >
> > > in h323.conf set the context=blah
> > >
> > > [blah]
> > >
> > > exten => 9999,1,Goto(s,1)
> > >
> > >
> > > Done... its really that simple.  I have this working with a 2600 and a
> > > 1750.
> > >
> > > bkw
> > >
> > > On Wed, 24 Sep 2003, Joseph Finley wrote:
> > >
> > > > I too would like to see it.  I've tried many times with the help of
a few
> > > > and never got it to work.  It always results in a fast busy.
> > > >
> > > > Joe
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: asterisk-users-admin at lists.digium.com
> > > > [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Bartosz
Jozwiak
> > > > Sent: Wednesday, September 24, 2003 9:46 AM
> > > > To: ASTERISK USERS
> > > > Subject: [Asterisk-Users] Cisco 2600 and ASTERISK
> > > >
> > > >
> > > > Hello,
> > > >
> > > > Could somebody tell me if I can connect CISCO 2600 router with
support of
> > > > H.323 to Asterisk ?
> > > > If it is possible could somebody tell me how to do it.
> > > > I would like to document it and put on some website so everyone can
see it.
> > > >
> > > > Regards,
> > > >
> > > > -- bart
> > > >
> > > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>