[Asterisk-Users] Cisco 2600 and ASTERISK

[Sean Figgins]

That is about what I have been seing for help.  Has anyone any clue what
to di with a 2600 that has a T1 adapter on a high-density high-density
voice port adapter?

BTW...  Because I am lazy, what does plar do?

-Sean

On Wed, 24 Sep 2003, Brian West wrote:

> This is simple to do..
>
> voice-port 1/0/0
>  connection plar 9999
> !
> voice-port 1/0/1
>  connection plar 9999
> !
> dial-peer voice 1000 voip
>  max-conn 4
>  destination-pattern 9999
>  req-qos guaranteed-delay
>  codec g711ulaw
>  ip precedence 5
>  no vad
>  session target ipv4:x.x.x.x
> !
>
> in h323.conf set the context=blah
>
> [blah]
>
> exten => 9999,1,Goto(s,1)
>
>
> Done... its really that simple.  I have this working with a 2600 and a
> 1750.
>
> bkw
>
> On Wed, 24 Sep 2003, Joseph Finley wrote:
>
> > I too would like to see it.  I've tried many times with the help of a few
> > and never got it to work.  It always results in a fast busy.
> >
> > Joe
> >
> >
> > -----Original Message-----
> > From: asterisk-users-admin at lists.digium.com
> > [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Bartosz Jozwiak
> > Sent: Wednesday, September 24, 2003 9:46 AM
> > To: ASTERISK USERS
> > Subject: [Asterisk-Users] Cisco 2600 and ASTERISK
> >
> >
> > Hello,
> >
> > Could somebody tell me if I can connect CISCO 2600 router with support of
> > H.323 to Asterisk ?
> > If it is possible could somebody tell me how to do it.
> > I would like to document it and put on some website so everyone can see it.
> >
> > Regards,
> >
> > -- bart
> >
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>