[Asterisk-Users] TDM400p loading errors

[Ben Bloomberg]

I just received one yesterday and it seems to work fine... I'm running  
RH9 w/SIP, IAX, and Zaptel devices.

-ben

On Monday, September 15, 2003, at 01:56  PM, Bob Knight wrote:

> I finally received a phone call from Silicon Labs.
> They left a voice mail saying they were going to email me a
> data sheet for Si3210.  I have not received it yet.  As soon as I
> do and I get a little free time I will kick the chip around a little
> and try to narrow down the problem.
>
> A few questions:
>
> 1. Has anyone received a new (since sept 1) tdm400p card that works?
>
> 2. Why isn't digium looking into this?
>
> OK. Now it is time for me to go back to my full time job of trying to  
> find a job.
>
>
> Azher Amin wrote:
>
>> Hi,
>>  I have received a new card TDM400P revision E, from digium. When I  
>> tried to modprobe wcfxs it gave me the following errors:
>>  Freshmaker version: 63
>> Freshmaker passed register test
>> ProSLIC on module 0 insane (1) 255 should be 2
>> Module 0: Not installed
>> ProSLIC on module 1 insane (1) 255 should be 2
>> Module 1: Not installed
>> ProSLIC on module 2 insane (1) 255 should be 2
>> Module 2: Not installed
>> ProSLIC on module 3 insane (1) 0 should be 2
>> Module 3: Not installed
>> /lib/modules/2.4.20-8/misc/wcfxs.o: init_module: No such device
>> Hint: insmod errors can be caused by incorrect module parameters,  
>> including invalid IO or IRQ parameters.
>>       You may find more information in syslog or the output from dmesg
>> /lib/modules/2.4.20-8/misc/wcfxs.o: insmod  
>> /lib/modules/2.4.20-8/misc/wcfxs.o failed
>> /lib/modules/2.4.20-8/misc/wcfxs.o: insmod wcfxs failed
>>  I have another TDM400P revision C (few months older) which works  
>> perfectly on the same slot of the system. The machine is AMD750 and I  
>> have tested several other cards and they worked fine.
>>  Plz suggest me about this problem and how to correct it.
>>  Regards
>> Azher
>> ---------------------------------------------------------------------- 
>> --
>> Do you Yahoo!?
>> Yahoo! SiteBuilder  
>> <http://us.rd.yahoo.com/evt=10469/*http://sitebuilder.yahoo.com> -  
>> Free, easy-to-use web site design software
>
>
>
> -- 
> Bob Knight
> [-w] the work option
> bk at minusw.com
> 925-449-9163
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>