[Asterisk-Users] 3 fritz-cards pci

[Marian Danisek]

hello,

got anybody succesfully setup asterisk with three avm fritz pci cards -
using the howto described in 

http://www.quiss.org/caiviar/Two-Fritzcards-HOWTO

i already have asterisk working with 2 cards, by when i add third card
and compile driver ( see capiinit debug below ) asterisk freeze on capi
initialization....
does anybody know how to solve this ?

regards Marian

------------------

Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/capiutil.o
Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/kernelcapi.o
Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/capiutil.o
Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/kernelcapi.o
Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/capifs.o
Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/capi.o
Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/fcpci.o
Warning: loading fcpci will taint the kernel: non-GPL license - Proprietary
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/f2pci.o
Warning: loading f2pci will taint the kernel: non-GPL license - Proprietary
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/f3pci.o
Warning: loading f3pci will taint the kernel: non-GPL license - Proprietary
  See http://www.tux.org/lkml/#export-tainted for information about tainted modules
fcpci	-	-(0)	-	-	-	-	
f2pci	-	-(0)	-	-	-	-	
f3pci	-	-(0)	-	-	-	-	
1 fcpci      running  fritz-pci        A1 3.10-02 0xdc00 5
2 f2pci      running  fritz2-pci       A1 3.10-02 0xe000 12
3 f3pci      running  fritz3-pci       A1 3.10-02 0xe400 10

-- 
SUNTEQ s. r. o.
Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic
Tel: +421-46-5430 754 # Fax: +421-46-5439 144
http://www.sunteq.sk/
------------------------------------------------------------
A mind is like a parachute... it only works when it's open.