[Asterisk-Users] Disconnect Problem

[Rich Adamson]

> I have an FX0 card installed in * and connected to a PBX. Calling works 
> ok ( both in bound /out bound) but after the call, I have to press the 
> '#' key to terminate the call, otherwise the line stays busy. Anybody 
> has a fix for that?

Best guess with no other info is the type of call supervision used by the
pbx is not the same as that specified for *. You might consider posting the
relavent section of zapata.conf and, if you know exactly how your pbx is
configured, some info on that line/trunk.