[Asterisk-Users] Configuration for Asterisk with Cisco Router FXO

[Christian Hecimovic]

Does this FXO gateway have good hangup detection on loop start lines? I 
configured a Mediatrix gateway (the 1204) similarly to your config, and it 
didn't detect hangups properly either. Right now, I just have two X100P-type 
cards in the server (actually, they are cheap generic modem cards and I 
hacked the wcfxo module to recognise them - saves a bundle) and modified the 
Asterisk source directly to be smart enough to know when to do a soft hangup.

On Wednesday 17 September 2003 09:26, Gerry Boudreaux wrote:
> Since I see so many questions about this, and could not find a concise
> answer when I was looking for the same thing...
>
> Here is an example showing how to configure communications between
> Asterisk and a Cisco 2600 router with an FXO card in it.
>
> http://www.tape.net/~gerry/asterisk/cisco26x0.html
>
> Comments and suggestions are welcome.
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users