[Asterisk-Users] Hangups after voicemail

[Christian Hecimovic]

Hi Wade,

Yes, my zapata.conf looks like this:

group = 1
context = incoming
signalling = fxs_ks
echocancel = yes
echocancelwhenbridged = yes
channel => 1-2

So they are configured as kewlstart.

Thanks,

Chris

On Tuesday 16 September 2003 16:53, Wade J. Weppler wrote:
> Have you tried using kewlstart instead?  Your loopstart lines might be
> configured for kewlstart (forward disconnect supervision).
>
> -wade
>
> > -----Original Message-----
> > From: Christian Hecimovic [mailto:checimovic at qworks.ca]
> > Sent: Tuesday, September 16, 2003 7:48 PM
> > To: asterisk-users at lists.digium.com
> > Subject: [Asterisk-Users] Hangups after voicemail
> >
> > Hi,
> >
> > Try as I might, I can't get hangups detected on a Zap channel with
>
> loop
>
> > start
> > lines. So, after someone leaves a voicemail and then hangs up,
>
> Asterisk
>
> > doesn't know it, exits VoicemailMain2, and loops back to the corporate
> > greeting, tying up the line even though the outside caller has hung
>
> up.
>
> > Therefore, I've added the following hideous hack - er, code - to
> > voicemail2.c.
> > It starts right after the call to play_and_record() in
>
> leave_voicemail().
>
> > if (res != '#' && chan != NULL && !strncmp(chan->name, "Zap", 3)) {
> > 	/* Hang up the Zap channel only */
> > 	ast_softhangup(chan, AST_SOFTHANGUP_EXPLICIT);
> > }
> >
> > Obviously, it hangs up the channel after the voicemail has been
>
> recorded,
>
> > if
> > the # key wasn't pressed, if the channel still exists, and if it's a
>
> Zap
>
> > channel. I couldn't see a way to do this with AGI.
> >
> > Question: is this safe? I used a soft hangup because the channel is
> > controlled
> > by another thread. I also modified channel.c so that
>
> ast_channel_free()
>
> > sets
> > chan to NULL after it's freed, just in case. Is there anything else I
> > should
> > be aware of? The code seems to work in my testing, resulting in a
>
> proper
>
> > hangup right after the voicemail has been recorded. I'm not up on my
> > Asterisk
> > internals, so I'm not totally confident about this.
> >
> > Thanks,
> >
> > Chris
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users