[Asterisk-Users] h323 v oh323

[Langley, Sean]

Use oh323.

Download the openh323 and pwlib tarballs from openh323.org

Follow Jeremy's instructions in the /asterisk/channels/h323/ directory EXACTLY!

good luck

Regards,

Sean Langley, P.Eng
Firmware Engineer
General Dynamics Canada
(403)730-1482
sean.langley at gdcanada.com


> -----Original Message-----
> From: Senad Jordanovic [mailto:senad at cwcom.net]
> Sent: Friday, September 12, 2003 8:18 AM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] h323 v oh323
> 
> 
> I have been reading archive post in regards to h323 support, 
> and I am not
> clear on this:
> 
> 1.
> Is h323 enabled and ready to use if one compiles asterisk, 
> zaptel and libpri
> (as shown on asterisk.org) ?
> 
> 2.
> If it is, is it h323 or oh323?
> 
> 3.
> If it is not, does one just need to follow instructions in
> /asterisk/channels/h323/
> in order to get it enabled.
> 
> 4.
> I have an Ericsson webswitch 100 G4 (4 FXO ports). Once h323 is
> enabled/configured
> in *, WHY there is no any authentication needed on Ericsson 
> box for placing
> the calls?
> I presume, that when Ericsson, "assigns" LAN IPs, that only 
> those boxes can
> communicate with it?
> Is that correct?
> 
> 
> Thanks
> 
> 
> Senad
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>