[Asterisk-Users] PROBLEM RECIVING CALLS AT FXO

[Rich Adamson]

Alvaro,

I'm pretty new at this as well, so be carefull with my comments. I just
spent many many hours with the opposite of your problem (incoming calls
worked fine, could not make an outgoing call for anything. Fixed it now.)

In your zapata.conf file you have the following statements:
 context=bell 
 signalling=fxs_ks 
 mailbox=yes 

That eseentially says, whenever an incoming calls comes in, * is going to
look in the extensions.conf file for a context named "bell". That context
(or reference) should look something like:
 [bell]
 exten => s,1,Dial(1234,15)

where 1234 is a valid extension number where incoming calls should be
directed to. Statements after the exten => should address what you'd like 
to do when extn 1234 is unanswered, busy, etc. Since I typed the above 
from memory, be sure to check the syntax of the statements.

Since it looks like you use John Todd's examples, the above could be
rewritten as:
 
[globals]
PHONE1=SIP/2203
PHONE2=SIP/2204

[bell]
exten => s,1,Dial(${PHONE1}&${PHONE2},15)
exten => s,2,Wait,2
exten => s,2,Voicemail,u3000
exten => s,102,Voicemail,b3001

The above says... an incoming call from "bell" will ring both extensions
2203 and 2204, and if the 15 second timeout is reached, wait two seconds,
then go to extension 3000's voicemail if "u"nanswered, or to extension
3001's voicemail if "b"usy.

Rich

------------------------
  From: Alvaro Parres <arabe at xmarts.com>
  Subject: [Asterisk-Users] PROBLEM RECIVING CALLS AT FXO
  Date: Thu, 11 Sep 2003 17:23:53 -0500 
  To: "asterisk-users at lists.digium.com" <asterisk-users at lists.digium.com>


> Hi... 
>  
>   I have the next problem.. I have a FXO card with i can make calls but i cant 
> recive calls.  
>  
>   At the consol, i get the next error: 
>  
>     -- Zap/2-1 is ringing 
>     -- Zap/2-1 is ringing 
>     -- Zap/2-1 answered Zap/1-1 
>     -- Attempting native bridge of Zap/1-1 and Zap/2-1 
> WARNING[262160]: File chan_zap.c, Line 2857 (zt_handle_event): Ring/Off-hook 
> in strange state 6 on channel 1 
>  
>    My config files are: 
>  
> ---- zaptel.conf ----- 
> fxsks=1 
> fxoks=2-3 
> loadzone = us 
> defaultzone=us 
>  
> --- zapata.conf ----- 
> [channels] 
> relaxdtmf=yes 
> busydetect=yes 
> callprogress=yes 
> callwaiting=yes 
> callwaitingcallerid=yes 
> threewaycalling=yes 
> transfer=yes 
> cancallforward=yes 
> usecallerid=yes 
> hidecallerid=no 
> echocancel=yes 
> echocancelwhenbridged=yes 
> rxgain=0.0 
> txgain=0.0 
> group=1 
> pickupgroup=1-2 
> ;immediate=no 
> context=bell 
> signalling=fxs_ks 
> mailbox=yes 
> ;callerid=asrecive 
> channel=1 
> context=home 
> group=2 
> signalling=fxo_ks 
> channel=2-3 
> callerid="FIJO" <200> 
> channel=3 
> callerid="INALAMBRICO" <100> 
> channel=2 
>  
> ---- extensions.conf ---- 
>  
> [dialout] 
> ignorepat => 9 
> exten => _9.,1,Dial(${PSTN}/${EXTEN:1},120,T) 
> exten => 9,1,Dial(Zap/g1/) 
> exten => 9,2,Congestion 
>  
> Thanks. 
>  
>  
>  
>   
>  
>  
> -------------------------- 
> Alvaro I. Parres Peredo 
> Director de IT 
> Xmarts, Soluciones Inteligentes 
> Bernardo de Balbuena #35 
> Tel: 36301294 
> http://www.xmarts.com 
> 
> -------------------------------------------------
> This mail sent through IMP: http://horde.org/imp/
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users

---------------End of Original Message-----------------