[Asterisk-Users] LEDs on E100P card

[Chee Foong]

Hi thanks for your reply,

I have plugged in a E1 trunk to my E100P card and there is flashing red
light. The E1 has no signalling, it has not been configured yet at the
provider side. In this scenario, would I get a green light or flashing red?

By the way what is red alarm? is it a E1 terminology?




----- Original Message -----
From: "Mark Spencer" <markster at digium.com>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, September 10, 2003 10:06 PM
Subject: Re: [Asterisk-Users] LEDs on E100P card


> One is a bicolor LED which indicates:
>
> off - span not configured / driver not loaded
> green - OK
> red (flashing) - RED Alarm
> yellow - Yellow Alarm
>
> The second is an orange LED which indicates a loopback (local or remote)
> is up for testing purposes.
>
> Mark
>
> On Wed, 10 Sep 2003, Chee Foong wrote:
>
> > Hello,
> >
> > There are 2 leds at the back of the E100P card. I search the mailing
list and digium website. There seems to be no documentation about them.
> >
> > On the card itself, 1 led is labeled D1 and the other is labled D2.
> >
> > Can someone explain or point me to the right resources about these leds.
> >
> > Thanks
> >
> > Foong
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>