[Asterisk-Users] help on MOH config, pretty close?

[CW_ASN]

Sometimes it happened that error to me. Reinitiating Linux and proving again
(modprobe/insmod), the error disappeared.


----- Original Message -----
From: "Eric Wieling" <eric at fnords.org>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, September 09, 2003 9:48 PM
Subject: Re: [Asterisk-Users] help on MOH config, pretty close?


> The source code for your kernel is not the same as the kernel actually
> running on the machine.
>
> On Tue, 2003-09-09 at 20:38, Rich Adamson wrote:
> > After following your suggestions, I get....
> >
> > [root at Phoenix zaptel]# /sbin/modprobe ztdummy
> > /lib/modules/2.4.20-18.9/misc/zaptel.o: kernel-module version mismatch
> >         /lib/modules/2.4.20-18.9/misc/zaptel.o was compiled for kernel
version 2
> > .4.20-6
> >         while this kernel is version 2.4.20-18.9.
> > /lib/modules/2.4.20-18.9/misc/zaptel.o: insmod
/lib/modules/2.4.20-18.9/misc/zap
> > tel.o failed
> > /lib/modules/2.4.20-18.9/misc/zaptel.o: insmod ztdummy failed
> > [root at Phoenix zaptel]#
> >
> > I should have two X100P Digium cards arriving tomorrow. Rather then mess
with this,
> > should I just wait until those cards are installed?
> >
> >
> > ------------------------
> > > If I'm not mistaken, ztdummy makes work moh and meetme...
> > > Do lsmod from sh. If you don't see ztdummy, download zaptel, and
modify
> > > Makefile. Line 89 must be:
> > >
> > > MODULES=zaptel.o tor2.o torisa.o wcusb.o wcfxo.o wcfxs.o \
> > >         ztdynamic.o ztd-eth.o wct1xxp.o wct4xxp.o ztdummy.o
> > >
> > > (Remove # preceding ztdummy.o)
> > >
> > > Then, do a make and make install. When finish, do:
> > >
> > > modprobe ztdummy
> > >
> > > Meetme and MOH should work now.
> > >
> > >
> > > ----- Original Message -----
> > > From: "Rich Adamson" <radamson at routers.com>
> > > To: <asterisk-users at lists.digium.com>
> > > Sent: Tuesday, September 09, 2003 9:59 PM
> > > Subject: RE: [Asterisk-Users] help on MOH config, pretty close?
> > >
> > >
> > > > The show modules command line suggests that is Not loaded. Should if
be,
> > > and
> > > > if so, where do I do that?
> > > >
> > > > Rich
> > > >
> > > > ------------------------
> > > > > Do you have loaded ztdummy as module?
> > > > >
> > > > >
> > > > > -----Mensaje original-----
> > > > > Trying to test the music on hold function and can't seem to get it
to
> > > work.
> > > > > If anyone has it running, could you give me a clue? (I have
googled and
> > > > > found lots of questions, but no real suggestions.)
> > > > >
> > > > > I downloaded and installed the mpg123 package. From the RH9
console I
> > > can
> > > > > start the executable and hear the music via the speakers. The
executable
> > > > > is located in /usr/bin. (That works!)
> > > > >
> > > > > I set the following line in musiconhold.conf file:
> > > > >   default => mp3:/var/lib/asterisk/mohmp3/
> > > > > and when I do a ps ax |grep mpg123 I get:
> > > > >   15798 pts/0    S      0:00 /usr/bin/mpg123 -q -s --mono -r
8000 -b
> > > 2048
> > > > > For-You.mp3
> > > > > If I stop asterisk, the above line disappears. (That works!)
> > > > >
> > > > > For lab work, the sip.conf has:
> > > > >  allow=ulaw
> > > > > only.
> > > > >
> > > > > In the zapata.conf file I have:
> > > > >   musiconhold=default
> > > > >
> > > > > On asterisk startup, the console window shows:
> > > > >   == Parsing '/etc/asterisk/musiconhold.conf': Found
> > > > >   WARNING[1074504864]: File res_musiconhold.c, Line 506
(moh_register):
> > > > > Unable to
> > > > >   open pseudo channel for timing...  Sound may be choppy.
> > > > >   == Registered application 'MusicOnHold'
> > > > >   == Registered application 'WaitMusicOnHold'
> > > > >   == Registered application 'SetMusicOnHold'
> > > > > which looks like its okay.
> > > > >
> > > > > The the asterisk command line, I see:
> > > > >     -- Called 3002
> > > > >     -- SIP/3002-3ed3 is ringing
> > > > >     -- SIP/3002-3ed3 is ringing
> > > > >     -- SIP/3002-3ed3 answered SIP/3000-0e7b
> > > > >     -- Attempting native bridge of SIP/3000-0e7b and SIP/3002-3ed3
> > > > >     -- Started music on hold, class 'default', on SIP/3002-3ed3
> > > > > but nothing is heard on either C7960's or Snom 200.
> > > > >
> > > > > I have not modified anything in sip.conf or extensions.conf; am I
> > > suppose
> > > > > to?
> > > > >
> > > > > What am I missing????
> > > > >
> > > > > Rich
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Asterisk-Users mailing list
> > > > > Asterisk-Users at lists.digium.com
> > > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > > >
> > > > > _______________________________________________
> > > > > Asterisk-Users mailing list
> > > > > Asterisk-Users at lists.digium.com
> > > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > >
> > > > ---------------End of Original Message-----------------
> > > >
> > > >
> > > > _______________________________________________
> > > > Asterisk-Users mailing list
> > > > Asterisk-Users at lists.digium.com
> > > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > ---------------End of Original Message-----------------
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> --
> BTEL Consulting
> 850-484-4535 x2111 (Office)
> 504-595-3916 x2111 (Experimental)
> 877-552-0838 (Backup Phone)
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users