[Asterisk-Users] Endpoint-to-Endpoint RTP Packets

[Ernest W. Lessenger]

At 02:38 PM 9/9/2003 -0500, you wrote:
>That would be reinvite= and canreinvite= in the user entry for each SIP
>endpoint.  Asterisk will allow the endpoints to talk directly to each
>other if both those settings are = yes (the default, I think) AND both
>endpoints use the same protocol (SIP) AND the same codec.

So Asterisk will allow it... and if I set both to no, asterisk would act as 
a true proxy, using the most bandwidth efficient codec available for each 
leg of the call (i.e. GSM for x-lite and g.729 for Cisco et al)?

Thanks,
--Ernest


>On Tue, 2003-09-09 at 13:04, Sean P. Robertson wrote:
> > I have seen this asked in the archives several times, but do not see a
> > definitive answer anywhere. Is there a way to tell the Asterisk to act like
> > a "normal" SIP Proxy, handling only the SIP messages, and letting the 
> RTP go
> > point-to-point?
> > ----- Original Message -----
> > From: "Sean Figgins" <sfiggins at mail.celicas.org>
> > To: <asterisk-users at lists.digium.com>
> > Sent: Tuesday, September 09, 2003 1:40 PM
> > Subject: Re: [Asterisk-Users] freebsd and asterisk ?? anyone yet
> >
> >
> > > On Mon, 8 Sep 2003, Jim Mercer wrote:
> > >
> > > > > Can we bribe you? :)
> > > >
> > > > sure, pay my rent for 3 months and give me a 50" plasma TV to play in
> > the
> > > > background.
> > >
> > > Is that all?  That sounds rather cheap, compared to the things direction
> > > that I'd have to go if I wanted to stick to the cisci CM route, with
> > > licenses for every endpoint that I want to connect.
> > >
> > > Realistically...  I just can not comprehend how to get stuff to work
> > > correctly with Linux.  I used to be a Linux nut years ago, but once I
> > > found FreeBSD with it's ports collection, I wondered why anyone ever
> > > bothered with Linux and it's completely messed up software install
> > > requirements.
> > >
> > > Right now, under RedHat 9.0, I have * running, but no hardware, and I
> > > can't figure out how to get h.323 operational so I can talk to my cisco
> > > gateway with the PRI interface...  I'm only guessing that FreeBSD 
> would be
> > > much easier for non-programmers like myself.
> > >
> > > -Sean
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>--
>BTEL Consulting
>850-484-4535 x2111 (Office)
>504-595-3916 x2111 (Experimental)
>877-552-0838 (Backup Phone)
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users