[Asterisk-Users] Call Time out Problem-Very Urgent!

[Eric Wieling]

Try this:

 Dial(Zap/g4/123456,20,t)

I've found that mixing | in a Dial() can cause a problem.  I don't know
why and I don't know when, but I had a problem.

or this:

 Dial(Zap/1/123456,20,t)

Just in case you have some problem with your group= settings.

On Mon, 2003-09-08 at 02:16, Surajee Ratnayake wrote:
> hi,
>  
> yes we tried without |t, but it didn't work..
> still keeps on ringing forever...
> :-(
>  
> Surajee
>  
>  
>         ----- Original Message ----- 
>         From: Surajee Ratnayake
>         To: asterisk-users at lists.digium.com
>         Sent: Monday, September 08, 2003 12:49 PM
>         Subject: [Asterisk-Users] Call Time out Problem-Very Urgent!
>         
>         hi,
>          
>         I have a problem in call time out,
>         An ISDN PRI E1 from PSTN and another ISDN PRI E1 from a 
>         Nortel PBX is conneted to my server.
>         But when i do a Dialout(from both E1s)the calls do not
>         timeout.
>         For ex. 
>          Dial(Zap/g4/123456|20|t)
>          
>         suppose other side is ringing and is not answering.
>         even after 20 seconds, call doesn't get timeout
>          
>         pls gv me a solutions..
>         its really urgent..
>          
>         Surajee
-- 
BTEL Consulting
850-484-4535 x2111 (Office)
504-595-3916 x2111 (Experimental)
877-552-0838 (Backup Phone)