[Asterisk-Users] how to connect 2 TE410P

[Kelvin Chua]

neat! actually we are just in the process of planning 
for an asterisk based simulation lab for the university. 
do you have a cable pin-out descriptions for that purpose?
thanks!

~kelvin

----- Original Message ----- 
From: "Steven Critchfield" <critch at basesys.com>
To: <asterisk-users at lists.digium.com>
Sent: Monday, September 08, 2003 12:52 PM
Subject: Re: [Asterisk-Users] how to connect 2 TE410P


> On Sun, 2003-09-07 at 23:24, Kelvin Chua wrote:
> > hi guys,
> >  
> > do you have any suggestions on how to connect 2 TE410P via E1? (for
> > simulation and testing purposes) 
> >  
> > asterisk1 --> TE410P ----> ? ---------> ? ---->TE410P -->asterisk2 
> 
> T1/E1 cross over cable. Or another possible route without needing the
> second TE410P card is to use a cross over cable to attach port x to port
> y of the same card. Let asterisk control port x and then use something
> like my perl wrapper to make calls via port Y. 
> -- 
> Steven Critchfield <critch at basesys.com>
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>