[Asterisk-Users] Re: Asterisk Jitters
Eric Wieling
eric at fnords.org
Fri Sep 5 09:54:19 MST 2003
As you can see wcfxo is still sharing an IRQ. It won't work well if it
shares an IRQ.
On Fri, 2003-09-05 at 19:39, Zak wrote:
> Hi Steven.
>
> I have done as you suggested and I'm still getting the same problem.
> /proc/interrupts lists the following:
>
> 0: 45489 XT-PIC timer
> 1: 235 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 5: 335816 XT-PIC wcfxo, Intel ICH2
> 8: 1 XT-PIC rtc
> 9: 0 XT-PIC usb-uhci
> 10: 829 XT-PIC eth0
> 11: 0 XT-PIC usb-uhci
> 12: 194 XT-PIC PS/2 Mouse
> 14: 4402 XT-PIC ide0
> 15: 2 XT-PIC ide1
> NMI: 0
> ERR: 0
>
> I am also getting the following message when asterisk starts.. but I'm
> not sure if it means anything?
>
> WARNING[16384]: File chan_oss.c, Line 974 (load_module): XXX I don't
> work right
> with non-full
> duplex sound cards XXX
> == Registered channel type 'Console' (OSS Console Channel Driver)
> == Parsing '/etc/asterisk/oss.conf': Found
> WARNING[114696]: File chan_oss.c, Line 232 (sound_thread): Read error
> on sound
> device: Resource temporarily unavailabl
>
> thank,
>
> Zak
> >Bing,Bing,Bing, we have the problem. nvidia and wcfxo cards on the same
> >interupt.
>
> >I'd say try removing a 2 WCFXO cards from the system and see if the
> >interupts free up, and your jitter stops.
>
> > 12: 524504 XT-PIC PS/2 Mouse
> > 14: 165140 XT-PIC ide0
> > 15: 281208 XT-PIC ide1
> > NMI: 0
> > ERR: 0
--
BTEL Consulting
850-484-4535 x2111 (Office)
504-595-3916 x2111 (Experimental)
877-552-0838 (Backup Phone)
More information about the asterisk-users
mailing list