[Asterisk-Users] Asterisk and Cisco 7960

[Andrew Gillham]

Sorry for the late reply on this..

Ben Wern wrote:

> Andrew,
>
> Thanks for your help!
>
> I did have the outgoing proxy set -- since I had FWD set up on line 1. 
> I removed all the FWD stuff, and the outgoing proxy. I altered the 
> entry to have the qualify, canreinvite, and nat lines and also altered 
> the user id to be a number. Now I'm able to call other local 
> extensions, but I can't call into the Cisco. But it's progress! 

The outgoing proxy apparently overrides the per line proxy, so you want
 to leave it empty and just configure each line with the appropriate proxy.

>
>
> I can also call out to FWD, but audio drops after a few seconds. Don't 
> even want to think about getting FWD calls back into the network.
>
>> exten => 1000,1,Dial(SIP/1000 at 1000,20,tr)
>
>
> This didn't work - what does the @1000 indicate? 

If your sip.conf entry is under '[1000]' and you have the Cisco 
configured as
'1000', this is tell the 7960 which line is ringing.  That is why you 
get the 404 not found
because it doesn't know which line you're calling.

-Andrew