[Asterisk-Users] IAX2 ports usage

[WipeOut .]

Yes, The RTP ports in * are configurable in rtp.conf..

The default is 10000 - 20000

Later

> HI!
> but when making iax2 calls, a packet monitor would only reveal this UDP port. (Between two * servers) ??????
>     4569  proto: U
> 
> ( I would assume even the RTP headers get enclosed by UDP, so there should have been more UDP port variants. Not the case when monitored.)
> 
> I've got these in my rtp.conf
>     rtpstart=10000
>     rtpend=20000
> Does it mean RTP use the above udp port range ?( 10000~20000).
> 
> denzel
> 
>   ----- Original Message ----- 
>   From: Wade J. Weppler 
>   To: asterisk-users at lists.digium.com 
>   Sent: Thursday, September 04, 2003 8:42 AM
>   Subject: RE: [Asterisk-Users] IAX2 ports usage
> 
> 
>   The RDP packets need to be dealt with as well.
> 
> 
> 
>   They are specified in rtp.conf
> 
> 
> 
>   -wade
> 
> 
> 
>   -----Original Message-----
>   From: denzel-infotechs [mailto:denzel at infotechs.lk] 
>   Sent: Thursday, September 04, 2003 12:29 AM
>   To: asterisk-users at lists.digium.com
>   Subject: [Asterisk-Users] IAX2 ports usage
> 
> 
> 
>   hi all !
> 
>       we've got IAX2 protocol working between several Asterisk servers. Now we are concerned with doing bandwidth management to maintain an acceptable voice quality. We thought of prioritizing the udp traffic. ( Giving a high priority to those IAX2 udp ports.)
> 
>       I know that IAX2 uses udp/4569. Is there any other traffic/ports that we need to consider for bandwidth shaping w.r.t IAX2.
> 
> 
> 
>   DenZel.
> 

-- 
______________________________________________
http://www.linuxmail.org/
Now with e-mail forwarding for only US$5.95/yr

Powered by Outblaze