[Asterisk-Users] 2 X100Ps give error

[Sergio Serrano Revuelto]

Try to do cat /proc/pci. You must verify that card doesn't share IRQ
with USB or other component.


srsergio




-----Mensaje original-----
De: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] En nombre de Cameron
Palmer
Enviado el: viernes, 31 de octubre de 2003 8:32
Para: asterisk-users at lists.digium.com
Asunto: RE: [Asterisk-Users] 2 X100Ps give error



RESULTS of your suggestion. I had tried similar variations from the 
mailing list archives the result was the same.

# modprobe wcfxo
ZT_CHANCONFIG failed on channel 2: No such device or address (6)
/lib/modules/2.4.22/misc/wcfxo.o: post-install wcfxo failed
/lib/modules/2.4.22/misc/wcfxo.o: insmod wcfxo failed

# ztcfg -vvvv
Zaptel Configuration
======================

Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)

2 channels configured.

ZT_CHANCONFIG failed on channel 2: No such device or address (6)


cameron.


On Fri, 31 Oct 2003, Sergio Serrano Revuelto wrote:

> Try to load module manually: modprobe wcfxo; ztcfg -vvvv
> 
> srsergio
> 
> 
> 
> 
> -----Mensaje original-----
> De: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] En nombre de Cameron 
> Palmer Enviado el: viernes, 31 de octubre de 2003 6:27
> Para: asterisk-users at lists.digium.com
> Asunto: [Asterisk-Users] 2 X100Ps give error
> 
> 
> I have two X100Ps in my zaptel.conf and have it configured:
> 
> fxsks=1-2
> 
> When starting rc.zaptel I get the error:
> 
> Loading zaptel framework...
> Loading zaptel hardware modules: wcfxo wcusb
> Running ztcfg...
> ZT_CHANCONFIG failed on channel 2: No such device or address (6)
> 
> As far as I can tell from the archived mailing lists I shouldn't have 
> this problem.
> 
> I do notice a difference in lspci which concerns me:
> 
> 00:0d.0 Communication controller: Tiger Jet Network Inc. Intel 537 
> 00:0e.0 Serial controller: Tiger Jet Network Inc. Intel 537
> 
> Why is one listed as a Communication controller and the other a serial
> controller?
> 
> What I'm trying to do...
> I have activated the second line option and put it into a call hunt 
> with
> 
> the first line on my Vonage account. At the office I have a Konexx DWI
> connecting my Nortel phone to my desktop running RedHat and a X100P.
My 
> goal is seamless (as far as my boss in Santa Cruz can tell)
connectivity
> 
> between home and office but maintaining a low ongoing cost. Namely 
> about
> 
> $60 per month.
> 
> Other details...
> 
> The home setup -
> 2 7960G SIP phones
> 1 ATA-186
> Linux (slackware 9.1) 2.4.22 on PIII 650MHz
> Connected to Vonage over the POTS.
> 2 X100P FXO Cards
> 
> The office setup -
> Dell Precision 650
> Redhat 9
> 1 X100P FXO Card
> Konexx DWI connected to Nortel phone
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users