[Asterisk-Users] ATA186 configuration for fax application

Wed Oct 29 06:27:52 MST 2003

The ATA186 is only rated to 9600 baud, it is not usable for faxing as 
most faxs
are 19200.  See Cisco sight for details.
http://www.cisco.com/en/US/products/hw/gatecont/ps514/products_field_notice09186a0080094af7.shtml

Eric Wieling wrote:

>If you have ANY chance of sending a fax over VoIP your codec MUST be
>ulaw or alaw.
>
>On Wed, 2003-10-29 at 03:52, Manuel MarÃn GarcÃa wrote:
>  
>
>>I have problems to send faxes using a fax machine connected to a ATA186 line
>>2. My sip.conf is
>>
>>[1151]
>>type=friend
>>username=1151
>>secret=xxxx
>>canreinvite=no
>>host=dynamic
>>dtmfmode=rfc2833
>>mailbox=1151
>>nat=1
>>context = optica
>>
>>ATA 186 connection mode is 0x00460400 and Audio mode is 0x00150014
>>
>>I always get poor line condition in the fax machine
>>
>>Does anyone have an example of how to configure ATA186 and sip.conf
>>Please help?
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>    
>>