[Asterisk-Users] Prob with Ringing multiple Channels

[surajee at infotechs.lk]

one more point, 
infact we tried with 'callprogress=yes', then both of the extensions starts ringing,
but the callee can not hear the ringback...

any suggestions...???


----- Original Message ----- 
From: <surajee at infotechs.lk>
To: <asterisk-users at lists.digium.com>
Sent: Friday, October 17, 2003 12:45 PM
Subject: [Asterisk-Users] Prob with Ringing multiple Channels


> hi,
> 
> The prob is when we ring 2 channels simultaneously, only 1 channel is actually ringing.
> 
> In our configuration, the Asterisk box is connected to an E1 channel bank,
> where 15 analog extensions are conencted to channelbank inturn.
> 
> We tried following,
> 
> Dial,Zap/g4/444&Zap/g4/448|20|t
> 
> Heres the output,
> 
>     -- Executing Dial("IAX2[trunk10 at trunk50]/1", "Zap/g4/444&Zap/g4/448|20|t") in new stack
>     -- Called g4/444
>     -- Called g4/446
>     -- Zap/1-1 answered IAX2[trunk10 at trunk50]/1
>     -- Hungup 'Zap/2-1'
> 
> the above, "Zap/1-1 answered IAX2[trunk10 at trunk50]/1" line comes as soon as
> that Zap/1-1 line starts ringing, while the Zap/2-1 is hungup.
> 
> in our zapata conf, 'callprogress=yes' is commented out.
> 
> any idea why is this happening?
> 
> Surajee
> 
> 
> --------------This mail sent through OmniBIS.com--------------
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 

--------------This mail sent through OmniBIS.com--------------