[Asterisk-Users] E100P setup in Switzerland

[CW_ASN]

Marcel:

Some switches with particular functionalities don't expect ton=unknown. For
example, Lucent 5ESS crap (in EuroISDN) doesn't work pretty well using
unknown.
In Siemens EWSD switch, if you have a divided PRI in two differents
Directory Numbers, you cannot send unknown.

In fact, send unknown is more comfortable, I know, but is not the better
resolution, neither A number nor B number.

Regards,

Gus


----- Original Message -----
From: "Marcel Prisi" <marcel at virtua.ch>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, October 14, 2003 7:32 PM
Subject: Re: [Asterisk-Users] E100P setup in Switzerland


> Marcel Prisi a écrit :
>
> > I have some news ... after a bit of tweaking, the following seems to
> > work with Swisscom :
> >
> > span=1,1,0,ccs,hdb3,crc4
> > bchan=1-15,17-31
> > dchan=16
> >
> > I still have a problem : Incoming calls from PRI work well, but
> > outgoing call don't :
> >
> > I dial from a Grandstream 101
> >
> >   -- Executing Dial("SIP/22-9129", "Zap/g1/234234234") in new stack
> >     -- Called g1/234234234
> >     -- Zap/1-1 is ringing
> >
> > Well ... I hear a ringing tone in the Grandstream, but the called
> > number doesn't ring at all ...
> >
> > What can I do ??
> >
> > Thanks
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
>
> Funny to reply to myself ... just for the sake of it, simply added
>
> pridialplan=unknown
>
> in zapata.conf  before the channels specifications and it works
> perfectly well !
>
> And thanks to Digium technical support !
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users