[Asterisk-Users] E100P setup in Switzerland

[martin at agilecall.com]

Quoting Marcel Prisi <marcel at virtua.ch>:
> Swisscom seems to use Siemens hardware.
> 
> Here are my configs (cvs from a few hours ago) :
> 
> zaptel.conf
> 
> loadzone=fr ; tried "de" but got warning at modprobe
> defaultzone=fr
> span=1,1,0,cas,hdb3,crc4,yellow ; Seems to be right, as the Siemens 
> bchan=1-15,17-31
> dchan=16

First of all use ccs not cas, 

When starting asterisk do U see that D channel is up
Are B channels restarted ?
When running zttool do you have OK value on your E1
Can u see the status from siemens side ?


regards
m.