[Asterisk-Users] New DIAX - version 0.9.4 - a big step forward - available for download

[Dan]

Hi,

> > This is especially true if DIAX has previously received a call, and that
> > call has been disconnected from the remote end.
> >
> > I have watched the Gastman (graphical asterisk manager) application, and
> > my own Call Manager application and both indicate that the system _is_
> > ringing the DIAX channel.  The DIAX just never rings, or changes to a
> > state where the user can answer the incoming call.
> >
> > A few experiments:
> >
> > I.
> > When the DIAX hangs up the call (is the _first_ party to hang up) the
> > call is terminated cleanly in all tests.  When the remote party (the GS
> > or XTEN) breaks the connection, the GS does not always drop the
> > connection immediately (though the Manager shows the call being torn
> > down and both parties dropping out).  When this occurs the DIAX will not
> > ring another incoming call -- it requires a restart first.
> >
> > II.
> > This does not always happen.  Sometimes the DIAX will stop responding
> > even if it properly hangs up.  Also, sometimes it takes several calls
> > before DIAX stops responding.
> >
> > III.
> > Even if DIAX has stopped responding to incoming calls, it is still
> > capable of making outbound calls, apparently without any problem.
> >
> > IV.
> > Even when DIAX doesn't immediately detect the handup (or respond to the
> > hangup event) and it is manually hung up after the call is torn down, it
> > is _sometimes_ still capable of receiving incoming calls.
> >
> > Could this have something to do with my configuration?  For what it's
> > worth, I don't see any errors in the Asterisk log.

The only thing I have seen happen from time to time is that when I call
DIAX, it does not ring.
Closing the other part and ringing again, it works.

I will try to build a DLL version for IAX and then replace the other one
till this issue is solved in IAX2

Best regards,
Dan