[Asterisk-Users] two X100P cards, different context

[John Brown (CV)]

based on below, you have them in the same context

insert a context=foo   line after  channel =>1

if you want channel 2 in a different context


On Sun, Nov 16, 2003 at 09:32:42PM +0200, Dan wrote:
> Hi,
> 
> I have two X100P cards in the same system.
> I can use both of them to initiate and/or receive PSTN calls.
> 
> I want now to define separate context for each of them, in oder to route
> inbound calls to different extensions.
> 
> This is what I have now in zapata.conf file:
> 
> [channels]
> language=en
> context=inbound-analog
> signalling=fxs_ks
> usecallerid=yes
> callwaiting=yes
> echocancel=yes
> echocancelwhenbridged=yes
> busydetect=yes
> busycount=10
> callerid=asreceived
> rxgain=10
> txgain=15
> channel => 1
> channel => 2
> 
> 
> What I must do to separate the two?
> Let's say:
> ZAP/1 in context 'in-number1'
> ZAP/2 in context 'in-number2'
> 
> Thanks,
> Dan
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users