[Asterisk-Users] Iax2 channel usage

Paulo Mannheimer paulohm at instant.com.br
Fri Nov 14 17:25:00 MST 2003


Correct me if I'm wrong.

If I have the following setup (a local user dialing through a remote
gateway using IAX2 )...

User -> * server <- IAX connection -> * server -> PSTN

The IAX connection between the servers is completed before the call to
the PSTN is succesfully completed, thus I will be using bandwidth even
for calls that aren't completed yet.


-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Steven
Critchfield
Sent: terça-feira, 11 de novembro de 2003 03:13
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] Iax2 channel usage


On Mon, 2003-11-10 at 05:54, Paulo Mannheimer wrote:
> Thanks Steven.
> 
> I'll have to find a way to use bandwidth only when the call to the 
> PSTN is completed on the other side.

Why does that matter? are you on a metered connection for bytes?


> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Steven 
> Critchfield
> 
> On Sun, 2003-11-09 at 14:01, Paulo Mannheimer wrote:
> > Hi all,
> > 
> > In a forthcommming project, I'll have one * server tentatively 
> > calling
> 
> > 10 PSTN numbers through IAX2 and an * gateway.
> > 
> > Can someone tell me if bandwidth is being used for each of these
> > calls/channels even while my gateway tries to call and connect the 
> > destination numbers?
> 
> Not sure I understand the question, but I'll try and answer it 
> anyways.
> 
> IAX and IAX2 is just like any other VoIP protocol and it only uses 
> bandwidth for active calls. If there isn't any active calls the 
> bandwidth used is very low and only what is necessary to confirm each 
> side is there and up.
> 
> When one gateway machine takes the call and decides it needs to go to 
> the other side, the other side will answer the call immediately and 
> yes there is bandwidth then being used. Ideally either you are now 
> playing prompts from the newly connected to asterisk machine, or you 
> are connecting to a phone and the call is completed.
> 
> Hope this helps a bit.
-- 
Steven Critchfield <critch at basesys.com>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users





More information about the asterisk-users mailing list