[Asterisk-Users] chan_zap won't load after CVS update

[Martin Pycko]

make sure the modules for your boards are loaded.
ztcfg -vv shouldn't return with any errors.

regards
Martin

On Fri, 14 Nov 2003, Matt Lawson wrote:

> I've just finished updating my Asterisk to the CVS version.
>  Unfortunately, chan_zap won't load anymore.
>
> The hardware has not changed and the config files have not changed.  I
> can re-install the two packages back and forth.  The old one will still
> work.  The new one won't.  I tried updating to a brand-new zaptel and
> wcfxo modules, with no difference.  This has got to be the most
> frustrating thing about dealing with Asterisk.  This is also the same
> error I get trying to get the FXS cards to work (I have never succeeded).
>
> There must be something else in the Makefile or configuration files.  Is
> there anything different regarding zap interfaces in the config files
> since maybe 3 months ago?
>
> The other differences I noticed were the modules chan_alsa.so,
> chan_oss.so (which didn't appear to be there before, or maybe in a
> different order), and a new requirement for libpri.so
>
> Same error message:
>
> [chan_zap.so] => (Zapata Telephony w/PRI)
>   == Parsing '/etc/asterisk/zapata.conf': Found
> DEBUG[16384]: File chan_zap.c, Line 1043 (update_conf): Updated
> conferencing on 1, with 0 conference users
> ERROR[16384]: File chan_zap.c, Line 5287 (mkintf): Unable to get span
> status: Inappropriate ioctl for device
> ERROR[16384]: File chan_zap.c, Line 6838 (load_module): Unable to
> register channel '1'
> WARNING[16384]: File loader.c, Line 305 (ast_load_resource):
> chan_zap.so: load_module failed, returning -1
> WARNING[16384]: File loader.c, Line 400 (load_modules): Loading module
> chan_zap.so failed!
>
> zapata.conf:
> [channels]
> echocancelwhenbridged=yes
> echocancel=yes
> stripmsd=1
> callerid=asreceived
> language=en
> context=incoming3121
> signalling=fxs_ks
> rxgain=3.0
> txgain=0.0
> usecallerid=yes
> group=1
> channel=1
>
>
> echocancelwhenbridged=yes
> echocancel=yes
> stripmsd=1
> usecallerid=no
> callwaiting=no
> callerid="intercom" <9876543210>
> context=incoming3130
> language=en
> signalling=fxs_ks
> group=1
> channel=2
>
>
> zaptel.conf can be blank or:
>
> loadzone=us
> defaultzone=us
> fxoks=1-2
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>