[Asterisk-Users] IAX channel and transfering calls

[Dan]

Hi,

Something like
exten => _91NXXNXXXXXX,1,Dial(IAX2/username at NuFone/${EXTEN:1},30,tTr)
to allow both the caller and the other part to transfer
Take care that the timeout parameter is first, then the 't"

BR,
Dan

----- Original Message ----- 
From: <firedude at shorelinuxsolutions.com>
To: <asterisk-users at lists.digium.com>
Sent: Thursday, November 13, 2003 3:44 AM
Subject: [Asterisk-Users] IAX channel and transfering calls


> Hi again,
> I'm attempting to figure out how to transfer calls from an IAX client.  I
> have read and seen on the list where if you put a ,t at the end of the
> dial portion in the extensions.conf file that you should be able to use
> the # to park and transfer calls. I have not found this to be the case.  I
> have tried it several different ways and I can't seem to get it to work.
> Can anyone send me a sample of what this line should look like?  Also, I'm
> having a bit of confusion as to exactly where in the extensions.conf file
> this should go.  I'm currently trying it by putting it in the line that
> passes the dialout to NuFone in my extensions.conf file.  However I am
> unsure if this will still allow me to park calls or even transfer calls if
> they are incoming from other IAX clients or from another context.
> Currently, my dial line looks like so:
>
> exten => _91NXXNXXXXXX,1,Dial,IAX2/username at NuFone/${EXTEN:1}
>
> I tried putting the comma t after the closing bracket and before the
> closing bracket. No success in either case. Any suggestions?
> AJ
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>