[Asterisk-Users] IAX clients and the flash button

[firedude at shorelinuxsolutions.com]

When is the expected rollout of this?
AJ


On Wed, 5 Nov 2003, Dan wrote:

> Hi Steven,
> 
> ----- Original Message ----- 
> From: "Steven Critchfield" <critch at basesys.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Wednesday, November 05, 2003 5:36 PM
> Subject: Re: [Asterisk-Users] IAX clients and the flash button
> 
> 
> > ...
> > Dan, Ariel is asking you to attack this problem incorrectly. You are
> > correct that there doesn't seem to be a flash function in IAX. There
> > doesn't need to be a flash function as you can signal out of band.
> > Specifically for transfer there is these IAX_FRAME_IAX subclasses;
> > #define IAX_COMMAND_TXREQ       22      /* Transfer Request */
> > #define IAX_COMMAND_TXCNT       23      /* Transfer Connect */
> > #define IAX_COMMAND_TXACC       24      /* Transfer Accepted */
> > #define IAX_COMMAND_TXREADY     25      /* Transfer ready */
> > #define IAX_COMMAND_TXREL       26      /* Transfer release */
> > #define IAX_COMMAND_TXREJ       27      /* Transfer reject */
> >
> > This means you just need to make a software transfer button.
> >
> > Of course while your at it, you might want to look into the three way
> > calling functions, and any other calling functions that might need to be
> > added that would otherwise be used by flash hooking a zap channel.
> You're right.
> I intend to add three way calling and transfer button only after IAX2 will
> be the default protocol of the application.
> I work on it.
> 
> >
> > Hope this helps.
> A lot. Thanks.
> 
> Best regards,
> Dan
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>