[Asterisk-Users] Unable to create channel of type 'Zap'

[Martin Pycko]

Then propably your board stoped taking interrupts. Try changing the PCI
slot or IRQ. Make sure you don't run X-windows.

regards
Martin

On Thu, 29 May 2003, Eduardo Goncalves wrote:

> On Thu, 29 May 2003 11:41:01 -0500 (CDT)
> Martin Pycko <martinp at digium.com> wrote:
>
> > Do you have your zap channel in asterisk when you type "zap show channels"
> > ?
> >
> > If not than make sure you have a proper config files (zaptel.conf &
> > zapata.conf)
> >
> > Martin
>
> Yes, I do
> *CLI> zap show channels
> Chan. Num. Extension  Context    Language   MusicOnH
>   1            default
>   2            default
>   3            default
>   4            default
> *CLI>
> ===========
> zaptel.conf
> ===========
> #E&M
> span=1,0,0,cas,hdb3
> e&m=1-4
> loadzone = us
> defaultzone=us
>
> ============
> zapata.conf
> ============
> [channels]
> group = 1
> context=default
> signalling=em
> channel => 1-4
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> rxgain=0.0
> txgain=0.0
> callgroup=1
> pickupgroup=1
> immediate=yes
>
>
> thanks
> Eduardo
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>