[Asterisk-Users] The Phantom Call.. T1 card too

[Steven Critchfield]

I had a similar problem when there was timing problems with my T100P.
You could also hear lots of popping and generally bad audio during the
dial tone. After we fixed the timing problem, the audio was clear as
could be, and the problems went away. Of course this doesn't fix a X100P
as it is strictly analog.

On Tue, 2003-05-27 at 12:03, Joe Antkowiak wrote:
> I've had the same thing happen, only on the single port T1 card and a
> channel bank, and one of the FXO channels also having a phone attached
> elsewhere...
> 
> I just wound up putting that channel in a different context and running
> 
> Exten => s,1,Hangup
> 
> (I'm just using the line for outbound dialing)
> 
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Tamas Levente
> Sent: Tuesday, May 27, 2003 11:45 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] The Phantom Call..
> 
> Same thing happened with me too. X100P. Same US tones
> Sometimes it gets into the voicemail too:)) And the voicemail record 3
> minutes tone, after 1.5minutes it's service not available or something
> similar.
> Is there a fix for that?
> 
> ----- Original Message ----- 
> From: "Mark Street" <mstreet at gracie.santarosa.edu>
> To: <levi at televersions.com>
> Sent: Tuesday, May 27, 2003 5:39 PM
> Subject: Re: [Asterisk-Users] The Phantom Call..
> 
> 
> > Funny,  I just noticed this happening on my box with 2 X101P's installed
> and a
> > phone connected to the same line as one of the X101P's.  I pick up the
> phone
> > after 1 ring, or call someone.  After a minute or two * picks up the line
> and
> > starts the greeting.....  I pull the plug on the asterisk box to continue
> the
> > conversation.  I just noticed it happening a couple of weeks ago.  US
> > dialtone here...
> >
> > On Tuesday 27 May 2003 08:13, Mark Spencer wrote:
> > > > Could it be that the X100P is detecting the UK dial tone as a ring??
> > > > or Has anyone else had a similar problem when using the X100P/S100U
> > > > combination??
> > >
> > > It's possible there is *something* on the line that is confusing
> Asterisk
> > > into thinking a ring takes place.  You might try adjusting the value of
> > > PEGCOUNT in wcfxo.c to a higher value (say, 10).
> >
> > -- 
> > Mark Street, D.C.
> > Red Hat Certified Engineer
> > Cert# 807302251406074
> > --
> > Key fingerprint = 3949 39E4 6317 7C3C 023E  2B1F 6FB3 06E7 D109 56C0
> > GPG key http://www.streetchiro.com/pubkey.asc
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Steven Critchfield  <critch at basesys.com>