[Asterisk-Users] H323

[Michael Manousos]

Dan wrote:
> Hi,
> 
> Ok now... Everything is compiled without any error (pwlib, openh323,
> asterisk-oh323).
> ...but now when I try to start Asterisk daemon, when it tries to load
> chan_oh323.so Asterisk exit by himself. (see below)
> 
> ......
> [app_flash.so] [app_flash.so] => (Flash zap trunk application)
>   == Registered application 'Flash'
>  [app_zapbarge.so] [app_zapbarge.so] => (Barge in on Zap channel
> application)
>   == Registered application 'ZapBarge'
>  [codec_ilbc.so] [codec_ilbc.so] => (iLBC/PCM16 (signed linear) Codec
> Translator)
>   == Registered translator 'ilbctolin' from format 10 to 6, cost 39
>   == Registered translator 'lintoilbc' from format 6 to 10, cost 128
>  [chan_oh323.so]
> Disconnected from Asterisk server
> 

That's it? No errors?
How do you run asterisk (-vvvc ? )
What is the configuration of OH323 (oh323.conf)?

Regards,
Michael.


> 
> Something else to do?
> 
> Thanks and best regards,
> Dan
> 
> ----- Original Message -----
> From: "Michael Manousos" <manousos at inaccessnetworks.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Tuesday, May 20, 2003 3:43 PM
> Subject: Re: [Asterisk-Users] H323
> 
> 
> 
>>Dan wrote:
>>
>>>Hi,
>>>
>>>I have tried to do it like in your doc, but when I try to compile pwlib,
> 
> at
> 
>>>the end of the operation I get those error messages:
>>>
>>
>>Compiling the pwlib/openh323 libraries is not described in detail
>>in the README file. Instructions for this can be found
>>on www.openh323.org.
>>
>>The errors below is related to the openssl installation.
>>Something is missing (krb5.h) and this causes the failure.
>>
>>Michael.
>>
>>
>>
>>>In file included from /usr/include/openssl/ssl.h:179,
>>>                 from ../../ptclib/pssl.cxx:195:
>>>/usr/include/openssl/kssl.h:72:18: krb5.h: No such file or directory
>>>In file included from /usr/include/openssl/ssl.h:179,
>>>                 from ../../ptclib/pssl.cxx:195:
>>>/usr/include/openssl/kssl.h:132: 'krb5_enctype' is used as a type, but
> 
> is
> 
>>>not
>>>   defined as a type.
>>>/usr/include/openssl/kssl.h:134: parse error before `*' token
>>>/usr/include/openssl/kssl.h:147: parse error before `*' token
>>>/usr/include/openssl/kssl.h:151: parse error before `*' token
>>>/usr/include/openssl/kssl.h:153: parse error before `*' token
>>>/usr/include/openssl/kssl.h:155: parse error before `*' token
>>>/usr/include/openssl/kssl.h:157: parse error before `*' token
>>>/usr/include/openssl/kssl.h:159: `krb5_context' was not declared in this
>>>scope
>>>/usr/include/openssl/kssl.h:159: parse error before `,' token
>>>/usr/include/openssl/kssl.h:160: `krb5_context' was not declared in this
>>>scope
>>>/usr/include/openssl/kssl.h:160: parse error before `,' token
>>>/usr/include/openssl/kssl.h:163: `krb5_timestamp' was not declared in
> 
> this
> 
>>>   scope
>>>/usr/include/openssl/kssl.h:163: parse error before `,' token
>>>/usr/include/openssl/kssl.h:165: parse error before `*' token
>>>/usr/include/openssl/kssl.h:167: `krb5_enctype' was not declared in this
>>>scope
>>>/usr/include/openssl/kssl.h:167: parse error before `,' token
>>>make[1]: *** [/usr/src/pwlib/lib/obj_linux_x86_r/pssl.o] Error 1
>>>make[1]: Leaving directory `/usr/src/pwlib/src/ptlib/unix'
>>>make: *** [opt] Error 2
>>>
>>>The pwlib source directory is /usr/src/pwlib
>>>the environment variables:
>>>PWLIBDIR=/usr/src/pwlib
>>>and
>>>LD_LIBRARY_PATH=$PWLIBDIR
>>>
>>>Any hints?
>>>
>>>Thanks,
>>>Dan
>>>
>>>----- Original Message -----
>>>From: "Michael Manousos" <manousos at inaccessnetworks.com>
>>>To: <asterisk-users at lists.digium.com>
>>>Sent: Tuesday, May 20, 2003 12:42 PM
>>>Subject: Re: [Asterisk-Users] H323
>>>
>>>
>>>
>>>
>>>>María de Ory wrote:
>>>>
>>>>
>>>>>I want to use Asterisk with H323. What must I do exactly? I need help
>>>>>because I'm not sure of having understood everything about the H323
>>>>>channel, the OpenH323 , the libraries and all those things I have read.
>>>>>Thanks a lot.
>>>>
>>>>You may download the code of the original H.323 support
>>>>for Asterisk from:
>>>>
>>>>http://www.inaccessnetworks.com/projects/asterisk-oh323
>>>>
>>>>The README file will provide all the information needed
>>>>to make it work.
>>>>
>>>>
>>>>
>>>>>Maria deory
>>>>
>>>>Michael.
>>>>
>>>>_______________________________________________
>>>>Asterisk-Users mailing list
>>>>Asterisk-Users at lists.digium.com
>>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>>
>>>
>>>
>>>
>>>_______________________________________________
>>>Asterisk-Users mailing list
>>>Asterisk-Users at lists.digium.com
>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users