[Asterisk-Users] (no subject)

[Alex Lopez]

Ahh, I finally found a use for the TDMoE post I made a few days ago.
Would TDMoE work in this case as it would free up two T1 ports and allow
the link to work the same???



-----Original Message-----
From: Martin Pycko [mailto:martinp at digium.com] 
Sent: Tuesday, May 20, 2003 1:48 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] (no subject)

You have to set up one pri as pri_net and the other as pri_cpe
(zapata.conf)

Martin

On Tue, 20 May 2003, Tom De Wispelaere wrote:

>
> Hey all,
>
> I have these two asterisk servers both with a E400P card inside and
was
> wondering what would be the easiest way to connect these two
physically
> (one port from one card to the port of the other).
>
> Im a bit in the dark in regards to the type of signalling i should use
on
> both ends.
>
> Thnx for any advice,
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users