[Asterisk-Users] busydetect=yes shows answered call on originating caller hangup

[wasim at convergence.com.pk]

simple setup... two * boxen, X100P in each

pots(1) --> ZAP/1 --> *(1) --> IAX2 --> *(2) --> ZAP/1 --> pots(2)

with busydetect=yes and callprogress=yes in zapata.conf, calling from
pots(1) through to pots(2) we get the following

    -- Zap/1-1 is ringing
    -- Zap/1-1 is ringing

etc, and if nobody picks up, then it timeouts and hangups, good

however, if during the ringing, pots(1), the calling party, hangups the
phone, we immediately get a

    -- Zap/1-1 answered IAX2[cbs1 at cbs1]/1

which is no good, cause *(1) and *(2) think the calls been answered
however, if we put busydetect=no then everything is as it should be, * 
rings for the specified time, and upon no answer we get a hangup/timeout

EXCEPT busydetect now isn't there, and that's sorely needed on X100P

tried both with IAX and IAX2, anybody else seen this... cvs as of last 
night...

--
Mirza Wasim Baig | Principal Consultant | Convergence Business Systems PK
VOX: +92(51)282-0628 x7400 | FAX: +92(51)282-0621 | GSM: +92(300)850-8070

This email and any information transmitted with it are confidential and
are intended solely for the use of the individual addressed.