[Asterisk-Users] Need help with zapata.conf

[Derek Beaumont]

ztcfg -vv gives the following output:
Zaptel Configuration
======================


Channel map:

Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Slaves: 04)

4 channels configured.


lsmod shows the following:

Module                  Size  Used by    Not tainted
wcfxs                  16384   0  (unused)
wcfxo                   8672   0
zaptel                181280   0  [wcfxs wcfxo]
.......


So I guess this is a hardware problem.  Should the (unused) go away once it 
is loaded?

------------OLD-------------------------------------------------------------------------------------
You don't have wcfxs module loaded. Check "ztcfg -vv"

On Tue, 20 May 2003, Derek Beaumont wrote:

>Here are the error messages I get from asterisk when I run asterisk -vvvc
>
>WARNING[16384]: File chan_zap.c, Line 575 (zt_open): Unable to specify
>channel 3: No such device
>ERROR[16384]: File chan_zap.c, Line 4718 (mkintf): Unable to open channel 
>3:
>No such device
>here = 0, tmp->channel = 0, channel = 3
>ERROR[16384]: File chan_zap.c, Line 6344 (load_module): Unable to register
>channel '3-4'
>WARNING[16384]: File loader.c, Line 297 (ast_load_resource): chan_zap.so:
>load_module failed, returning -1
>WARNING[16384]: File loader.c, Line 392 (load_modules): Loading module
>chan_zap.so failed!
>[root at BusinessOne asterisk]# Yuck! Error in buffer handling...: Connection
>reset by peer
>Ouch ... error while writing audio data: : Broken pipe
>
>
>Here is my zaptel.conf
>---------------------------------------------------
>loadzone = us
>defaultzone=us
>
>fxsks=1-2
>fxoks=3-4
>---------------------------------------------------
>
>---------------OLD MESSAGES---------------------------------------------
>
>Where are your errors ?
>
>For this hardware you also need to setup /etc/zaptel.conf
>fxsks=1-2
>fxoks=3-4
>loadzone=us
>defaultzone=us
>
>and do "ztcfg -vv" afterwards
>
>Martin
>
>On Tue, 20 May 2003, Derek Beaumont wrote:
>
> >I'm having a problem defining my channels
> >
> >Here is my zapata.conf
> >-----------------------------------------------------------------------------------------------------
> >; Zapata telephony interface
> >;
> >; Configuration file
> >
> >[channels]
> >;
> >rxwink=300              ; Atlas seems to use long (250ms) winks
> >usecallerid=yes
> >hidecallerid=no
> >callwaiting=yes
> >callwaitingcallerid=yes
> >threewaycalling=yes
> >transfer=yes
> >cancallforward=yes
> >callreturn=yes
> >echocancel=yes
> >echocancelwhenbridged=yes
> >
> >rxgain=-100.0
> >txgain=-50.0
> >
> >callgroup=1
> >pickupgroup=1
> >
> >immediate=no
> >musiconhold=default
> >
> >signalling=fxs_ks
> >context=incoming
> >group=1
> >channel=1-2     ;X100P
> >
> >signalling=fxo_ks
> >context=outgoing
> >group=2
> >channel=3-4   ;TDM10B
> >---------------------------------------------------------------------------------------------------------------
> >the ztcfg -vv command does not return an error, but there is an error
> >registering
> >channels 3 and 4 when I try to start asterisk.
> >
> >
> >I have had everything working if I define my channels at the top of the
> >file, but I am not able to
> >get any features such as echo cancellation to work if I define the 
>channels
> >at the top.
> >
> >Can anybody see my error(s)?
> >
> >_________________________________________________________________
> >STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
> >http://join.msn.com/?page=features/junkmail
> >
> >_______________________________________________
> >Asterisk-Users mailing list
> >Asterisk-Users at lists.digium.com
> >http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>_________________________________________________________________
>STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
>http://join.msn.com/?page=features/junkmail
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>

_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*.  
http://join.msn.com/?page=features/featuredemail