[Asterisk-Users] Need help with zapata.conf

[Derek Beaumont]

Here are the error messages I get from asterisk when I run asterisk -vvvc

WARNING[16384]: File chan_zap.c, Line 575 (zt_open): Unable to specify 
channel 3: No such device
ERROR[16384]: File chan_zap.c, Line 4718 (mkintf): Unable to open channel 3: 
No such device
here = 0, tmp->channel = 0, channel = 3
ERROR[16384]: File chan_zap.c, Line 6344 (load_module): Unable to register 
channel '3-4'
WARNING[16384]: File loader.c, Line 297 (ast_load_resource): chan_zap.so: 
load_module failed, returning -1
WARNING[16384]: File loader.c, Line 392 (load_modules): Loading module 
chan_zap.so failed!
[root at BusinessOne asterisk]# Yuck! Error in buffer handling...: Connection 
reset by peer
Ouch ... error while writing audio data: : Broken pipe


Here is my zaptel.conf
---------------------------------------------------
loadzone = us
defaultzone=us

fxsks=1-2
fxoks=3-4
---------------------------------------------------

---------------OLD MESSAGES---------------------------------------------

Where are your errors ?

For this hardware you also need to setup /etc/zaptel.conf
fxsks=1-2
fxoks=3-4
loadzone=us
defaultzone=us

and do "ztcfg -vv" afterwards

Martin

On Tue, 20 May 2003, Derek Beaumont wrote:

>I'm having a problem defining my channels
>
>Here is my zapata.conf
>-----------------------------------------------------------------------------------------------------
>; Zapata telephony interface
>;
>; Configuration file
>
>[channels]
>;
>rxwink=300              ; Atlas seems to use long (250ms) winks
>usecallerid=yes
>hidecallerid=no
>callwaiting=yes
>callwaitingcallerid=yes
>threewaycalling=yes
>transfer=yes
>cancallforward=yes
>callreturn=yes
>echocancel=yes
>echocancelwhenbridged=yes
>
>rxgain=-100.0
>txgain=-50.0
>
>callgroup=1
>pickupgroup=1
>
>immediate=no
>musiconhold=default
>
>signalling=fxs_ks
>context=incoming
>group=1
>channel=1-2     ;X100P
>
>signalling=fxo_ks
>context=outgoing
>group=2
>channel=3-4   ;TDM10B
>---------------------------------------------------------------------------------------------------------------
>the ztcfg -vv command does not return an error, but there is an error
>registering
>channels 3 and 4 when I try to start asterisk.
>
>
>I have had everything working if I define my channels at the top of the
>file, but I am not able to
>get any features such as echo cancellation to work if I define the channels
>at the top.
>
>Can anybody see my error(s)?
>
>_________________________________________________________________
>STOP MORE SPAM with the new MSN 8 and get 2 months FREE*
>http://join.msn.com/?page=features/junkmail
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>

_________________________________________________________________
STOP MORE SPAM with the new MSN 8 and get 2 months FREE*   
http://join.msn.com/?page=features/junkmail