[Asterisk-Users] Turning off Bridging?

[Martin Pycko]

You can use now
notransfer=yes

with IAX2

regards
Martin

On Wed, 30 Apr 2003, Darren Smith wrote:

> Hi
>
> I tried with ||t and ||T and ||r , none of them seem to work :-(
>
> Any more thoughts?
>
> Regards
>
> Darren.
>
> ----- Original Message -----
> From: "Martin Pycko" <martinp at digium.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Wednesday, April 30, 2003 7:52 PM
> Subject: Re: [Asterisk-Users] Turning off Bridging?
>
>
> > Try to call Dial with ||t option. You might try using ||T instead but I'm
> > not sure if it's implemented yet.
> >
> > Martin
> >
> > On Mon, 28 Apr 2003, Darren Smith wrote:
> >
> > > Hi folks
> > >
> > > Is it possible to turn off the native bridging on Asterisk?
> > >
> > > I've been hacking about app_disa.c to support account & pin numbers, that tag the
> calls
> > > depending on who logs in.....
> > >
> > > It all works fine, then dials the destination number they requested.
> > >
> > > My setup is as follows
> > >
> > > [ENDPOINT]       <IAX1>     [MYASTERISKBOX]    < IAX1 >    [TELCOBOX]<>(PSTN)
> > >
> > > If i dial [MYASTERISKBOX] via IAX1 from an <ENDPOINT> and call a pstn number, the call
> > > connects via [MYASTERISKBOX] but then gets transferred directly to TELCOBOX and I
> loose
> > > call duration etc :-(
> > >
> > > Logs from MYASTERISKBOX show the following:
> > >
> > >     -- Executing Dial("IAX[<ENDPOINTUSER>@<ENDPOINTIP>:5036]/55",
> > > "IAX/<MYUSER>:<MYPASS>@<TELCOBOXIP>/<DESTNUMBER>@<MYCONTEXT>") in new stack
> > >     -- Calling using options
> > >
> 'exten=<DSTNO>;callerid=<SRCNO>;language=en;context=<MYCONTEXT>;username=<MYUSER>;formats=
> > > 2;capability=2;version=1;adsicpe=0'
> > >     -- Called <MYUSER>:<MYPASS>@<TELCOBOXIP>/<DSTNO>@<MYCONTEXT>
> > >     -- Call accepted by <TELCOBOXIP> (format 2)
> > >     -- Format for call is 2
> > >     -- IAX[<TELCOBOX>]/57 is ringing
> > >     -- IAX[<TELCOBOX>]/57 stopped sounds
> > >     -- IAX[<TELCOBOX>]/57 answered IAX[<ENDPOINTUSER>@<ENDPOINTIP>:5036]/55
> > >     -- Attempting native bridge of IAX[<ENDPOINTUSER>@<ENDPOINTIP>:5036]/55 and
> > > IAX[<TELCOBOX>]/57
> > >     -- Channel 'IAX[<TELCOBOX>]/57' ready to transfer
> > >     -- Channel 'IAX[<ENDPOINTUSER>@<ENDPOINTIP>:5036]/55' ready to transfer
> > >     -- Releasing IAX[<ENDPOINTUSER>@<ENDPOINTIP>:5036]/55 and IAX[<TELCOBOX>]/57
> > >     ........
> > >     -- Hungup 'IAX[<TELCOBOX>]/57'
> > >
> > > The total call duration was about 42 seconds, yet the actual call was ~ 16 minutes.
> > >
> > > The Telcobox has a Digium E1 card in :)
> > >
> > > Any thoughts?
> > >
> > > Regards
> > >
> > > Darren Smith
> > > Game Digital Ltd
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>