AW: AW: [Asterisk-Users] H323 participant to TDM participant sound crunched

[Michael Manousos]

Thomas Haeger wrote:
> OK.
> 
> I have used innovaphone ip400 gateway first, then neeting.
> Both times the sound was crunched. But only for the TDM40B-Channels.

That makes things harder. I can't debug it because I don't have
a TDM40B card. Did you try it with the latest asterisk-oh323 (0.5.2)?

Michael.

> If i used H323 to Modem or to H323 (all over Asterisk) then it was ok.
> Version of oh323 is 0.5.1
> 
> and here're my oh323conf:
> 
> 
> Thanks for Help,
> 
> Thomas.
> 
> 
> ;
> ; Configuration file of OpenH323 channel driver
> ;
> 
> ;-----------------------------------------
> ; General configuration options
> ; (ports, jitter, GK, ...)
> ;-----------------------------------------
> [general]
> 
> listenAddress=0.0.0.0
> 
> listenPort=1720
> 
> connectPort=1720
> 
> fastStart=yes
> 
> h245Tunnelling=yes
> 
> h245inSetup=yes
> 
> inBandDTMF=yes
> 
> silenceSuppression=no
> 
> 
> jitterMin=20
> jitterMax=60
> 
> ipTos=lowdelay
> 
> outboundMax=10
> inboundMax=10
> 
> gatekeeper=DISABLE
> 
> userInputMode=TONE
> 
> context=demo
> 
> [codecs]
> 
> codec=G711U
> frames=10
> 
> 
> -----Ursprüngliche Nachricht-----
> Von: asterisk-users-admin at lists.digium.com
> [mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Michael
> Manousos
> Gesendet: Montag, 12. Mai 2003 13:21
> An: asterisk-users at lists.digium.com
> Betreff: Re: AW: [Asterisk-Users] H323 participant to TDM participant
> sound crunched
> 
> 
> Thomas Haeger wrote:
> 
>>OK. Sorry ... (without Subject again)
>>
>>I' am using G711U on both sides (Asterisk <-> H323-Gateway or Endpoint)
>>
> 
> 
> What version of asterisk-oh323 are you using?
> What H.323 endpoints are you testing?
> Maybe a more detailed configuration of your
> Asterisk and an output of a sample session would help.
> 
> Michael.
> 
> 
> 
>>
>>
>>
>>-----Ursprüngliche Nachricht-----
>>Von: asterisk-users-admin at lists.digium.com
>>[mailto:asterisk-users-admin at lists.digium.com]Im Auftrag von Thomas
>>Haeger
>>Gesendet: Montag, 12. Mai 2003 12:45
>>An: Asterisk User
>>Betreff: [Asterisk-Users] (no subject)
>>
>>
>>Hi all,
>>
>>i have one TDM40B installed and i route all calls over OH323 endpoints.
>>This works fine, but if the other side takes up the voice from H323
>>participant is very crunched,
>>even though, the voice from Zap-channel comes fine.
>>
>>What can be the mistake ?
>>
>>
>>Thanks,
>>
>>Thomas.
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users