[Asterisk-Users] IAX1/2 routing/load balancing

[David Luyens]

Sorry for not being

Let me give a real example.
I have a four E1 GW in Europe which collects all my traffic destined for
US.
I have 4x a one E1 GW in the US named 'IAXserverA', etc.
I want to send the first call towards IAXserverA
The second to IAXserverB
The third to IAXserverC
The fourth to IAXserverD
The fifth to IAXserverA
.........

So all my traffic collected in Europe needs to be spread over the 4
IAXservers in the US....
Example:
Destination NY 212xxxxxx needs to be send to IAXserverA&B&C&D
Destination SF 415xxxxxx needs to be send to IAXserverA
.....

How would I do this?

David

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Steven
Critchfield
Sent: Tuesday, May 06, 2003 6:33 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] IAX1/2 routing/load balancing


On Tue, 2003-05-06 at 11:18, David Luyens wrote:
> Hi,
> 
> 
> Is it possible to route IAX traffic from 1 IAX server to several other

> IAX servers in a load balancing pattern. For example I have 3 
> terminating IAX servers in the US and I want to send all US traffic to

> those 3 servers equally spread?

Are you wanting to load balance CPU, bandwidth, or operator time? You
would possibly tackle these in different manners.

Most notably, possibly an AGI script that gathered statistics just
before placing the IAX leg of the call.

Almost everything is possible from AGI.

-- 
Steven Critchfield  <critch at basesys.com>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users