[Asterisk-Users] D-Link DG 104 S does not store settings

[Karl Putland]

On Fri, 2003-05-02 at 02:07, Tycho Schenkeveld wrote:
> I'm having a problem with the DG 104 S.
> 
> Due to low upstream i would like an other codec instead of the default
> g711mu of the DG 104 S.
> Changing it with telnet command ' set coding 1 coding_type g729ab' results
> in OK
> Typing show coding 1 displays the correct setting
> Saving the confing the DG 104 S reboots and during reboot restores all the
> default settings.
> I did the same trick on a DG 104 SH (the H323 version) and that one is ok.
> 
> Q: am i doing something wrong? Does anybody know how to do this?
> 

I have the same problems with settings that revert to factory.  And some
other issues with the tone tables.

--Karl

> I already upgrade the DG 104 S with the latest firmware
> 
> Henk Geurts
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Karl Putland <karl at putland.linux-site.net>