[Asterisk-Users] iconnecthere 480 error: is there a workaround?

[Gregg Lebovitz]

Luke,

Try putting the prefix of 7777 before your phone number. It changes the
codec expected by iconnect.

Gregg

On Thu, 2003-03-20 at 18:25, Luke Howard wrote:
> I've found the same.
> 
> If I make an outgoing call (snom 200 handset), I get about 5 seconds
> of audio and then it drops out (very occasionally it does work).
> 
> Incoming calls appear to work, though.
> 
>   -- Executing Goto("SIP/515-Office-143b", "iconnecthere-ulaw|91800XXXXXXX|1") in new stack
>   -- Goto (iconnecthere-ulaw,91800XXXXXXX,1)
>   -- Executing StripMSD("SIP/515-Office-143b", "1") in new stack
>   -- Executing Dial("SIP/515-Office-143b", "SIP/1800XXXXXXX at iconnecthere") in new stack
>   -- Called 1800XXXXXXX at iconnecthere
>   -- SIP/iconnecthere-960b answered SIP/515-Office-143b
>   -- Attempting native bridge of SIP/515-Office-143b and SIP/iconnecthere-960b
>   -- Got SIP response 480 "Temporarily not available" back from 213.137.73.178
>  == Spawn extension (iconnecthere-ulaw, 1800XXXXXXX, 2) exited non-zero on 'SIP/515-Office-143b'
> 
> SIP config is:
> 
> [general]
> port=5060
> bindaddr=0.0.0.0
> context=sip-remote
> disallow=all
> allow=ulaw
> allow=alaw
> tos=lowdelay
> tos=184
> register => 1XXXXXXXXXX:XXXX at natrelay.deltathree.com
> 
> [iconnecthere]
> type=friend
> username=XXXXXXXX
> password=XXXX
> host=sipauth.deltathree.com
> context=iconnecthere-ulaw
> callerid="PADL Software Pty Ltd" <(XXX) XXX XXXX>
> ;txgain = 5.0;
> ;rxgain = 5.0;
> inbanddtmf=1
> 
> -- Luke
> 
> P.S. Is anyone planning on licensing G 723.1 for use with Asterisk? As
> I understand it, buying a LineJACK won't suffice if the card's DSP is
> not actually used.
> --
> Luke Howard | PADL Software Pty Ltd | www.padl.com
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users