[Asterisk-Users] ATA186 v2.15mm help...

[Michiel Betel]

You have the skinny/mgcp firmware loaded, not the SIP one...
Get ata18x-v2-15-020927a-2.zip from cisco (or contact me off-list)

Michiel

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Jim Archer
Sent: vrijdag 14 maart 2003 22:46
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] ATA186 v2.15mm help...


Hi All...

I have a brand new ATA186 with the following firmware:

Version: v2.15.ms ata186 (Build 020919a)

I have been through the archives about how to configure it, but my colorful 
configuration web page does not have the same fields that people say I need 
to adjust.  Even the examples on Cisco's web site don;t match.  For 
example, I don't have the GtkOrProxy field, which is probably an important 
one.

Am I missing something very simple?  Thanks...

Jim




_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users