[Asterisk-Users] TIGER VS. WILDCARD X100

Francisco Perez-Landaeta fplandae at hotmail.com
Tue Mar 4 16:10:38 MST 2003


Hi i am a newie, and would like to know if the "TIGER" 560 IS THE SAME
as the X100 Voip card from Digium ?

Is it the same manufacturer ?

Will the Tiger board work under linux ?? anyone..

Thanks,

Francisco Perez-Landaeta

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Steve
Underwood
Sent: Tuesday, March 04, 2003 9:30 AM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] Re: Tormenta ISA E1 card

Hi John,

info at itwav.com wrote:

> Hi!Steve,
> Glad to receive your message. Could you tell me if the card can work
> properly in Asterisk? and what is the different bettween the Tormenta
> ISA E1 card and the ISA T1 card (I refer to the hardware). Thanks.
> john

The differences between the T1 and E1 versions are the frequency of the
two VCXO crystals, and part number of the two framer chips. Change those
to the E1 type and the card functions OK as a clock slave. A hardware
limitation means it will not perform properly as a clock master. As a T1
card clock master mode is OK. As an E1 card it isn't. Most people need
to slave most of the time to the great atomic clock in the PSTN, so this
isn't such a big limitation.

I never tried the card with Asterisk, but it should work for
CTR4/EuroISDN. I don't think there is support for any other protocols.
It works OK for the things I do with it, using libPRI and not using
Asterisk.

The differences between

> Steve Underwood writes:
>
>> info at itwav.com wrote:
>>
>>> Has any one used it?
>>
>>
>> Yes!
>>
Regards,
Steve


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list